Cutting access in the floor to replace fuel pump

I have a 1995 B3500 van with a 36 gallon gas tank. It's a real PITA to replace the fuel pump. My idea is to loosen the straps enough that the tank lowers enough to slide a piece of plate steel between the floor and the tank and then cut a hole in the floor with an angle grinder to access it. I would then add metal to put the patch back in and screw the cutout floor back on. Has anyone tried this? It would have been nice if Dodge would have done this.

I have a 1995 B3500 van with a 36 gallon gas tank. It's a real PITA to replace the fuel pump. My idea is to loosen the straps enough that the tank lowers enough to slide a piece of plate steel between the floor and the tank and then cut a hole in the floor with an angle grinder to access it. I would then add metal to put the patch back in and screw the cutout floor back on. Has anyone tried this? It would have been nice if Dodge would have done this.

Wed, 02 Nov 2022 18:50:18 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

91 B250 Van auto trans tail shaft

Has anybody replaced the extension housing bushing or tail-shaft bushing on a Dodge B250 van without removing the extension housing? I know there's tools available for this but trying to research the tool has been a hassle.

Has anybody replaced the extension housing bushing or tail-shaft bushing on a Dodge B250 van without removing the extension housing? I know there's tools available for this but trying to research the tool has been a hassle.

Wed, 02 Nov 2022 16:45:28 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2008 1500 Megacab - issues filling up gas tank

So I haven't been driving my Megacab much. It sat outside for 3 weeks and when I went to fill it up the pump would just click off like it does when its full. Moved the hose to different positions but it would only take gas real slow, stood there holding it for several minutes and only got 10 gallons. It did this at a second station as well. I was hoping it had a blocked vent somewhere, spiders nest, something but I can't find anything. Anyone know what I'm fighting?

So I haven't been driving my Megacab much. It sat outside for 3 weeks and when I went to fill it up the pump would just click off like it does when its full. Moved the hose to different positions but it would only take gas real slow, stood there holding it for several minutes and only got 10 gallons. It did this at a second station as well. I was hoping it had a blocked vent somewhere, spiders nest, something but I can't find anything. Anyone know what I'm fighting?

Wed, 02 Nov 2022 16:07:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

97 Dodge ram van 2500 6 cyl started back firing after replacing fuel pump can you please tell me why

97 Dodge ram van 2500 6 cyl backfires after replacing fuel pump can someone please tell me why

97 Dodge ram van 2500 6 cyl backfires after replacing fuel pump can someone please tell me why

Wed, 02 Nov 2022 13:58:13 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Autocrossing the 300

Hi, Here's a short video from my latest Auto-X with the 300. Hope you enjoy!

Hi,

Here's a short video from my latest Auto-X with the 300. Hope you enjoy!

Wed, 02 Nov 2022 04:02:50 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Power steering pump pulley

I am searching for a power steering pump pulley for my 2008 Ram 1500 four-wheel drive with 5.7 hemi. Anyone had this problem the pulley has came apart from the hub that is pressed onto the pump

I am searching for a power steering pump pulley for my 2008 Ram 1500 four-wheel drive with 5.7 hemi. Anyone had this problem the pulley has came apart from the hub that is pressed onto the pump

Wed, 02 Nov 2022 01:47:04 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

No spark Need HELP

So I have a 1984 dodge d150 with a 318. I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and... No spark Need HELP

So I have a 1984 dodge d150 with a 318.
I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and...

No spark Need HELP

Tue, 01 Nov 2022 22:45:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Both key fobs stopped working

Hello. I have a 2010 Caravan (base mode) and both key fobs stopped working (the previous owner said the 12v battery died at some point. I am not sure if it caused this though).The car starts fine but lock, unlock and panic buttons are not working. I changed the batteries but it did not make any difference. Any idead what it would be?

Hello. I have a 2010 Caravan (base mode) and both key fobs stopped working (the previous owner said the 12v battery died at some point. I am not sure if it caused this though).The car starts fine but lock, unlock and panic buttons are not working. I changed the batteries but it did not make any difference. Any idead what it would be?

Tue, 01 Nov 2022 23:01:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

No spark

So I have a 1984 dodge d150 with a 318. I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and... No spark

So I have a 1984 dodge d150 with a 318.
I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and...

No spark

Tue, 01 Nov 2022 22:45:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Mexican Spec 1980 Dodge Super Bee

By 1980 the name Super Bee was gone in the US. In Mexico it lasted a few more years. This is a 1980 model that is said to be restored. I think it is more that he made it nice. The 360 V8 has a few upgrades with the aluminum valve covers and intake manifold and the 4 barrel Holley carburetor. The car wears the special road wheels rarely seen in the US. The A/C even works which is also rare. If you want more information about this car please let me know. ... Mexican Spec 1980 Dodge Super Bee

By 1980 the name Super Bee was gone in the US.
In Mexico it lasted a few more years.
This is a 1980 model that is said to be restored.
I think it is more that he made it nice.
The 360 V8 has a few upgrades with the aluminum valve covers and intake manifold and the 4 barrel Holley carburetor.
The car wears the special road wheels rarely seen in the US.
The A/C even works which is also rare.

If you want more information about this car please let me know.

...

Mexican Spec 1980 Dodge Super Bee

Tue, 01 Nov 2022 22:15:22 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N