Tuesday, November 30, 2021

1977 M880 broken front axle?

I recently took my 880 on a very short trip to the dump and had a bit of pavement to go on, I know it's not great to drive 4 WD on dry pavement but it was a very short bit...I had to turn sharp to enter the dump road and I hear a BOOM on the right front side, pretty sure I broke an axle, drives fine but now I am hearing a bit of noise in the front and front right....opinions? Is this hard to fix, my dad had a bunch of parts for the truck, might have spare axles...
I recently took my 880 on a very short trip to the dump and had a bit of pavement to go on, I know it's not great to drive 4 WD on dry pavement but it was a very short bit...I had to turn sharp to enter the dump road and I hear a BOOM on the right front side, pretty sure I broke an axle, drives fine but now I am hearing a bit of noise in the front and front right....opinions? Is this hard to fix, my dad had a bunch of parts for the truck, might have spare axles...
Wed, 01 Dec 2021 07:10:57 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2004 dodge durango 5.7 hemi gas pedal

I have a lightning bolt flashing on dash and my gas pedal won't work
I have a lightning bolt flashing on dash and my gas pedal won't work
Wed, 01 Dec 2021 05:48:52 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

96 dodge ram 1500 5.2.motor 2wd ex.cab

My truck .won't even start now but before this happened it started ran in ideal but when shifting into any other gear it dies and won't start back idk why or whats wrong with it..this is my father in laws truck I got when he died so trying to get it back running also got my other 96 dodge ram 1500 single cab that is running but has no heat and keep owing my break light fuses every 5 10 mins driving it'll just burn fuses out everytime can't seem to find any naked wires or anything help please
My truck .won't even start now but before this happened it started ran in ideal but when shifting into any other gear it dies and won't start back idk why or whats wrong with it..this is my father in laws truck I got when he died so trying to get it back running also got my other 96 dodge ram 1500 single cab that is running but has no heat and keep owing my break light fuses every 5 10 mins driving it'll just burn fuses out everytime can't seem to find any naked wires or anything help please
Wed, 01 Dec 2021 03:06:52 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

No heat

The coolant is full and the heater core is hot but it still blows cold air.
The coolant is full and the heater core is hot but it still blows cold air.
Wed, 01 Dec 2021 00:56:59 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Monday, November 29, 2021

It's been a long road...

Back in July, I bought a 1998 Ram 1500 off of a gentleman who inherited it when his brother died. It had been sitting rusting away in his garage for 7 years, but it still ran and he was only asking $2k for it. He knew his brother had been in the process of turning it into a hunting truck, but that's all he could tell me about it. I got it home, pulled the frame off, ground the rust off the chassis and sealed it, then moved on to the frame and body, removing rust and patching holes. I had... It's been a long road...
Back in July, I bought a 1998 Ram 1500 off of a gentleman who inherited it when his brother died. It had been sitting rusting away in his garage for 7 years, but it still ran and he was only asking $2k for it.

He knew his brother had been in the process of turning it into a hunting truck, but that's all he could tell me about it.

I got it home, pulled the frame off, ground the rust off the chassis and sealed it, then moved on to the frame and body, removing rust and patching holes. I had...

It's been a long road...
Tue, 30 Nov 2021 00:19:34 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

How to keep the headlamp from falling out

The holes that held the bolts to keep my headlamp in on my 2004 Caravan have cracked. So far I can keep it in with duct tape but I would like a more elegant solution, if possible. Also, my liftgate struts continually break off at the joint. I am careful not to let it fly open. Is there a solution for that as well ?
The holes that held the bolts to keep my headlamp in on my 2004 Caravan have cracked. So far I can keep it in with duct tape but I would like a more elegant solution, if possible.

Also, my liftgate struts continually break off at the joint. I am careful not to let it fly open. Is there a solution for that as well ?
Tue, 30 Nov 2021 00:11:22 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Saturday, November 6, 2021

recently acquired in Alberta

1987 D150, 318 163 000 km , storage time unknown recently acquired Alberta, Canada original not restored
1987 D150, 318
163 000 km , storage time unknown
recently acquired Alberta, Canada
original not restored
Sun, 07 Nov 2021 02:52:24 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1970 Swinger Steel rims

What are the rim width sizes available for a 14" 5 lug, 4 inch bolt pattern. I just had my Dart worked on, and I am sure Mech. said I had 5 inch wides on the front, and 6 inch wides on the rear,,, ??? could he have meant 5 1/2 and 6 1/2 ? Anyway,,,,,,, I was looking for a rim for a spare,,, now I made need 2 or more to have 5 rims the same size,,,,, I have drums in the rear, and disc brakes in the front,,, with 215 / 70 R14 tires,,,,,,What is a good idea for me to go with ????[ATTACH... 1970 Swinger Steel rims
What are the rim width sizes available for a 14" 5 lug, 4 inch bolt pattern. I just had my Dart worked on, and I am sure Mech. said I had 5 inch wides on the front, and 6 inch wides on the rear,,, ??? could he have meant 5 1/2 and 6 1/2 ? Anyway,,,,,,, I was looking for a rim for a spare,,, now I made need 2 or more to have 5 rims the same size,,,,, I have drums in the rear, and disc brakes in the front,,, with 215 / 70 R14 tires,,,,,,What is a good idea for me to go with ????[ATTACH...

1970 Swinger Steel rims
Sat, 06 Nov 2021 22:10:46 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Friday, November 5, 2021

Grinding noise going from park to reverse.

I have a 2009 Ram 1500, 2 wheel drive, that makes a mild grinding noise for a second when I shift from park to reverse. I normally cant hear it first thing in the morning but after I've driven a while it starts making the noise. It almost feels like a pressure problem because if I go into a store for 10 minutes or so and come out and go from park to reverse it is much louder. Any ideas? And I just had the transmission rebuilt 4 months ago and the sound just started a couple weeks ago, I did... Grinding noise going from park to reverse.
I have a 2009 Ram 1500, 2 wheel drive, that makes a mild grinding noise for a second when I shift from park to reverse. I normally cant hear it first thing in the morning but after I've driven a while it starts making the noise. It almost feels like a pressure problem because if I go into a store for 10 minutes or so and come out and go from park to reverse it is much louder. Any ideas? And I just had the transmission rebuilt 4 months ago and the sound just started a couple weeks ago, I did...

Grinding noise going from park to reverse.
Fri, 05 Nov 2021 16:40:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Refresh your interior style with a set of Rixxu Seat Covers + New Promotion

Installing a set of seat covers can preserve the beauty and value of your car while expressing your aesthetic preferences. Whether you're a fan of classic style, sport style, camo style, or leather style, Rixxu has you covered with its extensive selection of custom seat covers. No matter which one you choose, you're sure to get superior protection from wear and tear, add a custom look, and achieve a more enjoyable...​ Refresh your interior style with a set of Rixxu Seat Covers + New Promotion


Installing a set of seat covers can preserve the beauty and value of your car while expressing your aesthetic preferences. Whether you're a fan of classic style, sport style, camo style, or leather style, Rixxu has you covered with its extensive selection of custom seat covers.

No matter which one you choose, you're sure to get superior protection from wear and tear, add a custom look, and achieve a more enjoyable...​

Refresh your interior style with a set of Rixxu Seat Covers + New Promotion
Fri, 05 Nov 2021 15:12:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Discussion ol

I have issue with my Dodge truck Sent from my itel W6002E using Tapatalk
I have issue with my Dodge truck

Sent from my itel W6002E using Tapatalk
Fri, 05 Nov 2021 14:22:55 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Thursday, November 4, 2021

1985 Dodge D150

Hello all, I inherited a 85 D150 318 engine single cab short wheel base from my great grandpa. I was wondering what would be a decent size engine and transmission I could put in it for pulling something like a camper?
Hello all, I inherited a 85 D150 318 engine single cab short wheel base from my great grandpa. I was wondering what would be a decent size engine and transmission I could put in it for pulling something like a camper?
Fri, 05 Nov 2021 03:35:50 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Fog light fuse

Can someone tell me is ther a fuse for the fog lights if so where Is it located and what number watts warlock 2020
Can someone tell me is ther a fuse for the fog lights if so where
Is it located and what number watts warlock 2020
Thu, 04 Nov 2021 23:50:51 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Off Road Challenger

I am the new owner of a 2020 Challenger GT (AWD), White Knuckle, with Blacktop package. I have admired the Challengers ever since they were released, but could never justify one as a daily driver since I live in Minnesota and need a vehicle with AWD. The AWD Challengers were a game changer for me. However, having small kids (with big car seats) prevented me from pulling the trigger. Well, my kids are now out of their huge car seats, so now is the time. What are my plans for the car? I've... Off Road Challenger
I am the new owner of a 2020 Challenger GT (AWD), White Knuckle, with Blacktop package. I have admired the Challengers ever since they were released, but could never justify one as a daily driver since I live in Minnesota and need a vehicle with AWD. The AWD Challengers were a game changer for me. However, having small kids (with big car seats) prevented me from pulling the trigger. Well, my kids are now out of their huge car seats, so now is the time.

What are my plans for the car? I've...

Off Road Challenger
Thu, 04 Nov 2021 20:51:31 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Question about harmonic balancers for my dodge

Hello all, I have a 2004 Dodge Ram 1500 hemi that the harmonic balancer went bad on. I gotten the old one off and matched it to the new one. My question is what is the looks to me a seal guard or plate for when the old did not have that. Any help is appreciated. Daniel
Hello all, I have a 2004 Dodge Ram 1500 hemi that the harmonic balancer went bad on. I gotten the old one off and matched it to the new one. My question is what is the looks to me a seal guard or plate for when the old did not have that. Any help is appreciated. Daniel

Thu, 04 Nov 2021 13:32:23 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Increase the comfort and style of your interior with Rixxu Seat Covers + Promo

Hello, everyone! We are pleased to announce another great deal at CARiD! This season, take your chance and purchase Rixxu seat covers with up to a 16% discount. Do not hesitate! The offer ends on December 30, 2021. Prices are already reduced. Rixxu seat covers will add some custom flair and protection to your interior. With so many styles and colors to select from, you can define your ride the way you want, where the only limit is your...​ Increase the comfort and style of your interior with Rixxu Seat Covers + Promo

Hello, everyone! We are pleased to announce another great deal at CARiD! This season, take your chance and purchase Rixxu seat covers with up to a 16% discount. Do not hesitate! The offer ends on December 30, 2021. Prices are already reduced.

Rixxu seat covers will add some custom flair and protection to your interior. With so many styles and colors to select from, you can define your ride the way you want, where the only limit is your...​

Increase the comfort and style of your interior with Rixxu Seat Covers + Promo
Thu, 04 Nov 2021 12:59:14 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Wednesday, November 3, 2021

Help fix or Drop the car?

I got into an accident and my insurance maybe will want to fix it? Do you think it's worth the fix or do you believe to much damage has been done? I'm not sure what to do at this point.


I got into an accident and my insurance maybe will want to fix it? Do you think it's worth the fix or do you believe to much damage has been done? I'm not sure what to do at this point.
Thu, 04 Nov 2021 04:01:26 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Fix or let go

I got into an accident and my insurance maybe will want to fix it? Do you think it's worth the fix or do you believe to much damage has been done? I'm not sure what to do at this point.

I got into an accident and my insurance maybe will want to fix it? Do you think it's worth the fix or do you believe to much damage has been done? I'm not sure what to do at this point.
Thu, 04 Nov 2021 03:52:39 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

van has no power at all

So my wife came home and said her power locks werent' working and some of the lights on the console were out. The rest of the van ran fine. I checked the fuses and pulled then IOD for about 5 minutes (this did nothing). Next i disconnected both battery cables for about 20 minutes. When I reconnected them there is absolutely no power to the van. No lights, nothing. I've checked the voltage at the battery and it reads 12.5volts so the battery isn't dead. Why is my vehicle getting no... van has no power at all
So my wife came home and said her power locks werent' working and some of the lights on the console were out. The rest of the van ran fine. I checked the fuses and pulled then IOD for about 5 minutes (this did nothing). Next i disconnected both battery cables for about 20 minutes. When I reconnected them there is absolutely no power to the van. No lights, nothing. I've checked the voltage at the battery and it reads 12.5volts so the battery isn't dead. Why is my vehicle getting no...

van has no power at all
Thu, 04 Nov 2021 03:37:29 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Radio dimmer

Hey gang. 07 Ram 2500 Megacab, 6.7L Cummins. When rolling the dimmer switch up to max, the radio face won't max out with the rest of the instrumentation. It does get a lil brighter but, not much. Ideas? Also the radio volume knob seems to lag badly whether turning up or down. Thanks for your input. -Pepperbelly
Hey gang. 07 Ram 2500 Megacab, 6.7L Cummins. When rolling the dimmer switch up to max, the radio face won't max out with the rest of the instrumentation. It does get a lil brighter but, not much. Ideas? Also the radio volume knob seems to lag badly whether turning up or down. Thanks for your input.
-Pepperbelly
Thu, 04 Nov 2021 02:54:54 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2008 - 2500 5.7 hemi - loss power to radio

I was using a small 12v air compressor to fill up a low tire up on the mountain. The compressor ran for about 15 minutes, then shut off. I discovered I had lost power to the outlet (the cigarette lighter one) and the radio. I found two blown 20 amp. fuses. #1 and #38. Replaced them but still no power to the outlet or radio. Is there another type of fuse that I'm overlooking? Before I take it into a mechanic, I'm hoping maybe I'm missing an easy fix.
I was using a small 12v air compressor to fill up a low tire up on the mountain. The compressor ran for about 15 minutes, then shut off. I discovered I had lost power to the outlet (the cigarette lighter one) and the radio. I found two blown 20 amp. fuses. #1 and #38. Replaced them but still no power to the outlet or radio. Is there another type of fuse that I'm overlooking? Before I take it into a mechanic, I'm hoping maybe I'm missing an easy fix.
Thu, 04 Nov 2021 01:01:36 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Dakota 3.9

I've got a 3.9l Dakota 92 model I've been working on. I've put alot of work and parts on the truck, it's running and driving now but it smokes alot. I've paid close attention to everything including the coolant and gaskets. As far as I can tell the coolant is pretty much still at the level it's been since I put it in and I've ran it for awhile and let it idle for awhile to warm up good and don't see any leaks at all or nothing from my stand point going wrong,leaking,steaming what so... Dakota 3.9
I've got a 3.9l Dakota 92 model I've been working on. I've put alot of work and parts on the truck, it's running and driving now but it smokes alot. I've paid close attention to everything including the coolant and gaskets. As far as I can tell the coolant is pretty much still at the level it's been since I put it in and I've ran it for awhile and let it idle for awhile to warm up good and don't see any leaks at all or nothing from my stand point going wrong,leaking,steaming what so...

Dakota 3.9
Wed, 03 Nov 2021 23:47:45 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

charging system

New member needing help, I have a 2000 durango, 4.7, 4x4. Alternator was very loud, so I bought another. When installed it started smoking and the alt gauge was at 12, then went all the way to the left. I replaced the old one, which had been charging well, and it did the same thing, showed 12v, then went all the way left ,I returned the alternator, bought another from another place. installed, no smoke but gauge does the same thing. searched forum, determined it must be charging control in... charging system
New member needing help,

I have a 2000 durango, 4.7, 4x4. Alternator was very loud, so I bought another. When installed it started smoking and the alt gauge was at 12, then went all the way to the left. I replaced the old one, which had been charging well, and it did the same thing, showed 12v, then went all the way left ,I returned the alternator, bought another from another place. installed, no smoke but gauge does the same thing. searched forum, determined it must be charging control in...

charging system
Wed, 03 Nov 2021 16:56:46 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2010 journey

I am trying to figure out what the bolt size is for the sway bar bracket for a 2010 journey. 2.4l
I am trying to figure out what the bolt size is for the sway bar bracket for a 2010 journey. 2.4l
Wed, 03 Nov 2021 13:54:22 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1977 Dodge Power Wagon Club Cab and 2015 Ram Sport

Hi, i just joined the group. I recently bought a 1977 power wagon to rebuild and its got a 440 on propane. I am going to put it back to gas. I am wondering if i should rebuild the 440 and maybe put it on fuel injection or maybe look at putting a hemi in it. The truck is getting a full rebuild. I don't see a lot of club cabs from the 70s being rebuilt so im going to do it. I also have a 2015 ram its been pretty good so far, its my 3rd ram hemi, i had a 12v cummins before that, that i... 1977 Dodge Power Wagon Club Cab and 2015 Ram Sport
Hi, i just joined the group. I recently bought a 1977 power wagon to rebuild and its got a 440 on propane. I am going to put it back to gas. I am wondering if i should rebuild the 440 and maybe put it on fuel injection or maybe look at putting a hemi in it. The truck is getting a full rebuild. I don't see a lot of club cabs from the 70s being rebuilt so im going to do it.

I also have a 2015 ram its been pretty good so far, its my 3rd ram hemi, i had a 12v cummins before that, that i...

1977 Dodge Power Wagon Club Cab and 2015 Ram Sport
Wed, 03 Nov 2021 13:23:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Tuesday, November 2, 2021

1985 B150 Ultra Van Royal For Sale - Slant 6, 4 on the Floor

Like the title says this rare and unique option package is for sale! I am only the 2nd owner it has lived it's whole life in the dry air of Colorado. In good shape. Clean and straight. See eBay listing here: 1985 Dodge Ram Van Royal | eBay Video tour and test drive: 1985 Dodge Ram Van B150 in good condition. The interior is in really good shape no tears in the seats. Carpets are clean and in... Click to expand... 1985 B150 Ultra Van Royal For Sale - Slant 6, 4 on the Floor
Like the title says this rare and unique option package is for sale! I am only the 2nd owner it has lived it's whole life in the dry air of Colorado. In good shape. Clean and straight.

See eBay listing here: 1985 Dodge Ram Van Royal | eBay

Video tour and test drive:


1985 Dodge Ram Van B150 in good condition. The interior is in really good shape no tears in the seats. Carpets are clean and in...
1985 B150 Ultra Van Royal For Sale - Slant 6, 4 on the Floor
Wed, 03 Nov 2021 02:27:01 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

11 Ram 1500 5.7L Serv 4wd

I have a service 4wd light on and when i scan my truck it comes up with a C1480 code, the light stays on my dash for a few days and then goes off but then my neutral light for my drive selector flashes red but when that stops the service 4wd light comes back on, please help trying to get this fixed before snow hits in NY.
I have a service 4wd light on and when i scan my truck it comes up with a C1480 code, the light stays on my dash for a few days and then goes off but then my neutral light for my drive selector flashes red but when that stops the service 4wd light comes back on, please help trying to get this fixed before snow hits in NY.
Wed, 03 Nov 2021 00:59:32 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

06 Durango electrical problems

Hello, I've got some crazy issues . It had a leak in the old sun roof.this has been replaced . Now the instrument panel all gauges and lights flashing, dome lights coming on at random times ,and the head lights come on by them selves in the middle of the night. I had the codes checked and it says u0101 replace front control module. Would a bad fcm cause all of the light/gage issues? Or is it water related ? Any help would be greatly appreciated.
Hello, I've got some crazy issues . It had a leak in the old sun roof.this has been replaced . Now the instrument panel all gauges and lights flashing, dome lights coming on at random times ,and the head lights come on by them selves in the middle of the night. I had the codes checked and it says u0101 replace front control module. Would a bad fcm cause all of the light/gage issues? Or is it water related ? Any help would be greatly appreciated.
Wed, 03 Nov 2021 00:33:06 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

P0153 Error Code I Simply Cannot Fix

I've spent over $4500 at this point with my own work and three different shops and I simply cannot get this code to go away. 2005 Dodge Ram 2500 Power Wagon 5.7 hemi (auto) with 117k on the clock. The code came on last December, I cleared it a few times just by unhooking the batteries but it always came back. Once it warmed up a bit in March I climbed under and started this shit trip: -March: replaced both forward O2 sensors --code came back-- -March: later I replaced the same O2 sensors... P0153 Error Code I Simply Cannot Fix
I've spent over $4500 at this point with my own work and three different shops and I simply cannot get this code to go away.

2005 Dodge Ram 2500 Power Wagon 5.7 hemi (auto) with 117k on the clock.

The code came on last December, I cleared it a few times just by unhooking the batteries but it always came back. Once it warmed up a bit in March I climbed under and started this shit trip:

-March: replaced both forward O2 sensors
--code came back--
-March: later I replaced the same O2 sensors...

P0153 Error Code I Simply Cannot Fix
Tue, 02 Nov 2021 22:21:14 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Dodge Nitro Cdi 2.8 4X4.

Dodge Nitro I would like to say Hello to all the club members and say that I'm new to the club and hope to bring something from adventures on this side of the pond England UK.
Dodge Nitro I would like to say Hello to all the club members and say that I'm new to the club and hope to bring something from adventures on this side of the pond England UK.
Tue, 02 Nov 2021 15:50:08 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Monday, November 1, 2021

Clutch linkage

Hi everyone, I have a 1987 dodge w100 with a 4speed.the cab rotted out so I bought a 1985 d150.so I am putting the whole body from the 85 onto the87 chassis. The clutch linkage from the 87 was attached to the body. But I had an 85 a while ago the linkage was attached to the frame" the pivot ball was.so my actual question is where can I find clutch parts online for this yr. Any Info will help Damian
Hi everyone, I have a 1987 dodge w100 with a 4speed.the cab rotted out so I bought a 1985 d150.so I am putting the whole body from the 85 onto the87 chassis.
The clutch linkage from the 87 was attached to the body.
But I had an 85 a while ago the linkage was attached to the frame" the pivot ball was.so my actual question is where can I find clutch parts online for this yr.
Any Info will help
Damian
Tue, 02 Nov 2021 02:32:59 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2019 2500 wheels on 1993 w250

i bought some wheels that are 2019 and I can't find spacers that will work from 8x6.5 to 1/2 studs and the new wheels are 10.15 studs but I can not find spacers to work could I just use spacers for 1/2 studs and still be fine or same thing with the 10.15 studs or will that not work because the studs are different also the truck looks really good with them and I want them to work but I'm stuck with not knowing what to do now
i bought some wheels that are 2019 and I can't find spacers that will work from 8x6.5 to 1/2 studs and the new wheels are 10.15 studs but I can not find spacers to work could I just use spacers for 1/2 studs and still be fine or same thing with the 10.15 studs or will that not work because the studs are different also the truck looks really good with them and I want them to work but I'm stuck with not knowing what to do now
Tue, 02 Nov 2021 02:09:21 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1980 d150 slant 6 relays/electrical help

just acquired a 1980 d150 with the slant 6, on the drivers side side/wheel well under hood there are 2 not sure word relay or look similar to the voltage regulator, well 1 is ok looking the other... not so hot ive tried many places and part names etc etc, but by looking in chilton & haynes manuals they have on the wiring schematics listing them as egr timer(or speed switch if equipeed), and etc timer, was curious are they required? maybe someone deleted the other parts? and would this... 1980 d150 slant 6 relays/electrical help
just acquired a 1980 d150 with the slant 6, on the drivers side side/wheel well under hood there are 2 not sure word relay or look similar to the voltage regulator, well 1 is ok looking the other... not so hot ive tried many places and part names etc etc, but by looking in chilton & haynes manuals they have on the wiring schematics listing them as egr timer(or speed switch if equipeed), and etc timer, was curious are they required? maybe someone deleted the other parts? and would this...

1980 d150 slant 6 relays/electrical help
Tue, 02 Nov 2021 02:14:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

How do you know when it's time to get a new truck?

I recently had to say goodbye to an old friend. I wanted to write this and I figured people here might be interested. She was a 2001 Dodge Ram 1500 with a 5.9L engine. Her official name was Twiggy but I mostly called her my baby. I bought her in November 2000 with 24 miles on her. It was a special order because I wanted all the bells and whistles in a standard sized cab. I never did like the look of those extended cabs. She finally shuffled off this mortal coil In september 2021 with... How do you know when it's time to get a new truck?
I recently had to say goodbye to an old friend. I wanted to write this and I figured people here might be interested. She was a 2001 Dodge Ram 1500 with a 5.9L engine. Her official name was Twiggy but I mostly called her my baby. I bought her in November 2000 with 24 miles on her. It was a special order because I wanted all the bells and whistles in a standard sized cab. I never did like the look of those extended cabs. She finally shuffled off this mortal coil In september 2021 with...

How do you know when it's time to get a new truck?
Mon, 01 Nov 2021 19:22:45 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Fuel tank size?

So have a 2018 2500 SLT Outdoorsman with Off-Road package. Could have swore I saw somewhere it was a 32 gallon tank but just looked at my window sticker and there is no mention of tank size on there which tells me it must be the standard one? What got me thinking was the last 2 times I filled it up my low fuel light was on. Yesterday it only took 22 gallons and the time before I think it took 25 but looking through my fuelly.com there were a few times where I noted I put 27 gallons in but... Fuel tank size?
So have a 2018 2500 SLT Outdoorsman with Off-Road package. Could have swore I saw somewhere it was a 32 gallon tank but just looked at my window sticker and there is no mention of tank size on there which tells me it must be the standard one? What got me thinking was the last 2 times I filled it up my low fuel light was on. Yesterday it only took 22 gallons and the time before I think it took 25 but looking through my fuelly.com there were a few times where I noted I put 27 gallons in but...

Fuel tank size?
Mon, 01 Nov 2021 15:42:56 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Maximize your visibility with new Spec-D Sequential DRL Bar Projector LED Headlights

The day you've all been waiting for has come. Spec-D designers finally came up with stylish, modern-looking, highly functional headlights for RAM trucks that can turn the darkest night into day and turn heads on the streets. Even though these new headlights incorporate all the latest lighting technologies, they feature a truly timeless design. They are full projector headlights with integrated SMD LED high beam and low beam bulbs. Dynamic LED DRL strips have a sequential LED...​ Maximize your visibility with new Spec-D Sequential DRL Bar Projector LED Headlights
The day you've all been waiting for has come. Spec-D designers finally came up with stylish, modern-looking, highly functional headlights for RAM trucks that can turn the darkest night into day and turn heads on the streets. Even though these new headlights incorporate all the latest lighting technologies, they feature a truly timeless design.

They are full projector headlights with integrated SMD LED high beam and low beam bulbs. Dynamic LED DRL strips have a sequential LED...​

Maximize your visibility with new Spec-D Sequential DRL Bar Projector LED Headlights
Mon, 01 Nov 2021 15:16:58 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2016 grand caravan sxt flex ves ribbon cable

Can anyone direct me to the correct ves ribbon cable for the 2nd row monitor. I don't think there is a mopar part number for this part. I see ribbon cables for the HD Blu ray player, but not for a standard DVD player ves monitor. I have the DVD player in my caravan. Thank you!
Can anyone direct me to the correct ves ribbon cable for the 2nd row monitor. I don't think there is a mopar part number for this part. I see ribbon cables for the HD Blu ray player, but not for a standard DVD player ves monitor. I have the DVD player in my caravan. Thank you!
Mon, 01 Nov 2021 14:58:40 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

SERV 4WD light on, no 4wd

Hi everyone, About a week and a half ago, I picked up a 2008 Ram 1500 that is working great except for the 4wd. The SERV 4WD light is on solid, and when I change the selector knob to auto, lock, and 4lo, nothing works. I do not hear anything working. I replaced the front actuator, but this didn't help. I have a new control knob coming today, but does anyone have any other ideas of what I should look at? Thanks
Hi everyone,

About a week and a half ago, I picked up a 2008 Ram 1500 that is working great except for the 4wd. The SERV 4WD light is on solid, and when I change the selector knob to auto, lock, and 4lo, nothing works. I do not hear anything working.

I replaced the front actuator, but this didn't help.

I have a new control knob coming today, but does anyone have any other ideas of what I should look at?

Thanks
Mon, 01 Nov 2021 12:27:18 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N