Sunday, July 31, 2022

2008 Grand Caravan 4.0L V6 Interference engine?

I have a 2008 Dodge Grand Caravan 2WD 6 Cylinders X 4.0L FI SOHC 241 CID. Recently while driving into the driveway the car died. It posted a camshaft sensor code. Replace it and the crank sensor. No luck in starting led to further investigation and the discovery that the water pump seized and shredded the timing belt. So now I'm left with either a timing belt and water pump replacement, or according to the research IF it has an INTERFERENCE engine, an entire engine replacement. I'm... 2008 Grand Caravan 4.0L V6 Interference engine?
I have a 2008 Dodge Grand Caravan 2WD 6 Cylinders X 4.0L FI SOHC 241 CID. Recently while driving into the driveway the car died. It posted a camshaft sensor code. Replace it and the crank sensor. No luck in starting led to further investigation and the discovery that the water pump seized and shredded the timing belt.

So now I'm left with either a timing belt and water pump replacement, or according to the research IF it has an INTERFERENCE engine, an entire engine replacement. I'm...

2008 Grand Caravan 4.0L V6 Interference engine?
Sun, 31 Jul 2022 21:14:00 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2014 caravan p0302 no answers

I've got the p0302 code on my 2014 caravan. It has 155,000 miles on it. It has been in the shop a few times for rockers arms and camshaft. We have taken meticulous care with maintenance. Now we got the p0302 misfire on cyl 2. It's been to two different shops and they have both changed out the spark plug and coil pack and did leak down test of the cylinder check camshafts and rockers. The second shop changed out the injector and still didn't help. The mechanic did say when he had it torn... 2014 caravan p0302 no answers
I've got the p0302 code on my 2014 caravan. It has 155,000 miles on it. It has been in the shop a few times for rockers arms and camshaft. We have taken meticulous care with maintenance. Now we got the p0302 misfire on cyl 2. It's been to two different shops and they have both changed out the spark plug and coil pack and did leak down test of the cylinder check camshafts and rockers. The second shop changed out the injector and still didn't help. The mechanic did say when he had it torn...

2014 caravan p0302 no answers
Sun, 31 Jul 2022 19:27:25 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1990 dodge 4x4 vin location.

I have a 1990 dodge w100 or 150?. I don't know lol it's 4x4 prospector that i need to find the vin on the frame to make sure what it is. I'm 30 and only have ever worked on chevy, ford and toyota products. Any knowledge is helpful.
I have a 1990 dodge w100 or 150?. I don't know lol it's 4x4 prospector that i need to find the vin on the frame to make sure what it is. I'm 30 and only have ever worked on chevy, ford and toyota products. Any knowledge is helpful.





Sun, 31 Jul 2022 16:57:08 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Saturday, July 30, 2022

72mm throttle body

Wouldn't let me post in the wanted section, does anyone have a 72mm throttle body for a 04-07 4.7 for sale?
Wouldn't let me post in the wanted section, does anyone have a 72mm throttle body for a 04-07 4.7 for sale?
Sun, 31 Jul 2022 02:48:05 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

P0307 only at cold start

I have a 2005 5.7 1500 that I occasionally get a P0307 code but only when it has been sitting for at least over night. I've changed the plugs for fresh champions, swapped the #5 and #7 coils and removed and cleaned the injectors, while swapping the #7 and #1 injectors. I've also swapped plug wires around. There is no noticeable miss, and no tick. I can clear the code and not get any codes for the rest of the day, no matter how many times I shut it off and restart. I am afraid it could be... P0307 only at cold start
I have a 2005 5.7 1500 that I occasionally get a P0307 code but only when it has been sitting for at least over night. I've changed the plugs for fresh champions, swapped the #5 and #7 coils and removed and cleaned the injectors, while swapping the #7 and #1 injectors. I've also swapped plug wires around. There is no noticeable miss, and no tick. I can clear the code and not get any codes for the rest of the day, no matter how many times I shut it off and restart. I am afraid it could be...

P0307 only at cold start
Sat, 30 Jul 2022 23:41:10 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Thursday, July 7, 2022

K10 - 29

I own a dodge product vintage from the 70s on the manual steering gear box is stamped K10-29 I am not saying what it is on because I don't want to limit the thinking Looking for crossover really as every reputable parts man going by the make and model yells UNICORN ALERT Any help? Any ideas? canadian here by the way too
I own a dodge product
vintage from the 70s
on the manual steering gear box is stamped K10-29
I am not saying what it is on
because I don't want to limit the thinking
Looking for crossover really
as every reputable parts man going by the make and model yells UNICORN ALERT
Any help? Any ideas?
canadian here by the way too
Thu, 07 Jul 2022 15:58:54 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Transmission

I have a 96 stratus only has 54,000 original miles was old lady car not driving much. I got it and when you first take off it made a sound like a ugah horn. Drove it fir 1 yr then it got to hitting hard when you would put it in gear and would not shift out. If you stopped killed motor and restart a few times it would go in gear smoothly and shift like it should. Been trying to figure out what is causing this. Has anyone else have this issue?
I have a 96 stratus only has 54,000 original miles was old lady car not driving much. I got it and when you first take off it made a sound like a ugah horn. Drove it fir 1 yr then it got to hitting hard when you would put it in gear and would not shift out. If you stopped killed motor and restart a few times it would go in gear smoothly and shift like it should. Been trying to figure out what is causing this. Has anyone else have this issue?
Thu, 07 Jul 2022 14:13:52 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

PCM Flashing

Who do you guys like for flashing PCMs? I just need a VIN changed. I sent one to B&G and it didn't work out well. The VIN was updated, but then I had a crazy surging idle and he really doesn't care to help me. I had to use another PCM and it works fine.
Who do you guys like for flashing PCMs? I just need a VIN changed. I sent one to B&G and it didn't work out well. The VIN was updated, but then I had a crazy surging idle and he really doesn't care to help me. I had to use another PCM and it works fine.
Thu, 07 Jul 2022 14:26:16 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

AC loosing Freon

Ok I am at a loss here. Have a 2011 that has lost all its freon, I did a vacuum pull just to check it, and it will pull but it will not hold. Did a UV check and can not find any place where it is leaking from under the hood. Any idea on where to look would be much appreciated.
Ok I am at a loss here. Have a 2011 that has lost all its freon, I did a vacuum pull just to check it, and it will pull but it will not hold. Did a UV check and can not find any place where it is leaking from under the hood. Any idea on where to look would be much appreciated.
Thu, 07 Jul 2022 13:39:57 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Mopar Muscle cars of the past.

Just wanted to see if anyone was interested in showing Mopars they use to have or maybe still has. Would love to see pictures and even a story you may have about it.
Just wanted to see if anyone was interested in showing Mopars they use to have or maybe still has. Would love to see pictures and even a story you may have about it.
Thu, 07 Jul 2022 12:54:42 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Wednesday, July 6, 2022

Chrysler Nationals

Hi Anyone going to Chrysler Nationals in Carlisle Pa this month ??
Hi Anyone going to Chrysler Nationals in Carlisle Pa this month ??
Wed, 06 Jul 2022 18:38:08 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

15% OFF | LED Lighting Upgrades

THE CLOCK IS TICKING... Hurry! There are ONLY 3 DAYS LEFT to save on your favorite LED lighting products from Diode Dynamics. COUPON CODE: JULY4 Click HERE to shop! ​ John C. Diode Dynamics... 15% OFF | LED Lighting Upgrades


THE CLOCK IS TICKING...

Hurry! There are ONLY 3 DAYS LEFT to save on your favorite LED lighting products from Diode Dynamics.

COUPON CODE:
JULY4


Click HERE to shop!

John C.
Diode Dynamics...

15% OFF | LED Lighting Upgrades
Wed, 06 Jul 2022 17:23:15 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Sliding Door Actuators and locking/unlocking issues

I found that on my 2016 Dodge Grand Caravan the passenger side sliding door would not lock. When I started to investigate this I found that it was a common problem on this series of vans and that lots of people were complaining about it and saying it should be covered because it was so expensive. There were even YouTube videos of people doing the relatively complicated repair. Sometimes the issue was that the door wouldn't unlock, but it was always the same part. If was an absolute fluke... Sliding Door Actuators and locking/unlocking issues
I found that on my 2016 Dodge Grand Caravan the passenger side sliding door would not lock. When I started to investigate this I found that it was a common problem on this series of vans and that lots of people were complaining about it and saying it should be covered because it was so expensive. There were even YouTube videos of people doing the relatively complicated repair. Sometimes the issue was that the door wouldn't unlock, but it was always the same part. If was an absolute fluke...

Sliding Door Actuators and locking/unlocking issues
Wed, 06 Jul 2022 17:26:42 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2019 Ram 4x4 CV Axle Fell Out Of Differential.

My husband has a 2019 Ram Rebel 4x4 still under warranty with 22,800 miles. He rarely uses 4 wheel drive, and does not go off-road. Saturday while backing down our drive, he heard and felt a clunk. He got out and looked underneath. The passenger side CV axle had come out of the differential, and inner parts were on our drive. He called the nearest dealer and was told they couldn't even look at it until the end of the month! I called the dealer we purchased from which is 150 miles away. After... 2019 Ram 4x4 CV Axle Fell Out Of Differential.
My husband has a 2019 Ram Rebel 4x4 still under warranty with 22,800 miles. He rarely uses 4 wheel drive, and does not go off-road. Saturday while backing down our drive, he heard and felt a clunk. He got out and looked underneath. The passenger side CV axle had come out of the differential, and inner parts were on our drive. He called the nearest dealer and was told they couldn't even look at it until the end of the month! I called the dealer we purchased from which is 150 miles away. After...

2019 Ram 4x4 CV Axle Fell Out Of Differential.
Wed, 06 Jul 2022 17:28:02 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1952 hood emblem

Working on a 1952 Dodge pickup for a friend. On each side of the hood are three holes for the "DODGE" emblem. Below where the Dodge emblem mounts there are two smaller holes (pic attached). Not able to find an pics showing anything mounted below the Dodge emblem. Hopefully someone can tell me what these smaller holes are for. Thanks
Working on a 1952 Dodge pickup for a friend. On each side of the hood are three holes for the "DODGE" emblem. Below where the Dodge emblem mounts there are two smaller holes (pic attached). Not able to find an pics showing anything mounted below the Dodge emblem. Hopefully someone can tell me what these smaller holes are for. Thanks
Wed, 06 Jul 2022 14:05:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

TRQ Auro Parts & Accessories for Easy Repairs

Looking for affordable and reliable auto parts? - TRQ should definitely be at the top of your list. With a wide range of repair parts available for nearly any model, TRQ is a great option no matter what type of vehicle you have. Whether you're looking for something as simple as a new set of brake pads or something more complex like an alternator, TRQ has you covered. And because they use high-quality materials, you can... TRQ Auro Parts & Accessories for Easy Repairs

Looking for affordable and reliable auto parts?
- TRQ should definitely be at the top of your list. With a wide range of repair parts available for nearly any model, TRQ is a great option no matter what type of vehicle you have. Whether you're looking for something as simple as a new set of brake pads or something more complex like an alternator, TRQ has you covered. And because they use high-quality materials, you can...

TRQ Auro Parts & Accessories for Easy Repairs
Wed, 06 Jul 2022 13:36:05 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Tuesday, July 5, 2022

Cranks when I connect the battery

I got a 1997 dodge ram 1500 5.9 magnum 2wd i just put a transmission in it but before i put the tranny in it would start just fine but now when I connect the battery it will crank the truck and if i turn the key on it will start the truck that way do i need to take my starter off maybe the 2 wires on top are touching idk
I got a 1997 dodge ram 1500 5.9 magnum 2wd i just put a transmission in it but before i put the tranny in it would start just fine but now when I connect the battery it will crank the truck and if i turn the key on it will start the truck that way do i need to take my starter off maybe the 2 wires on top are touching idk
Wed, 06 Jul 2022 03:32:53 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Limited edition 1/2 ton 8foot bed dodge adventure w/440factory engine

Anyone with info.
Anyone with info.
Tue, 05 Jul 2022 20:12:56 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

In Search Of Tires or wheels

I have inherited my grandfather's 1981 Dodge W200. I'm in desperate need of a set of 31x10.5 R16.5 preferably an all terrain type tire. Or a lead on a how to get western cyclone rims replicated in 16 inch or 17 inch. Trying to keep truck as close to original as possible and keep the look as close as possible. Thank you for any help!!
I have inherited my grandfather's 1981 Dodge W200. I'm in desperate need of a set of 31x10.5 R16.5 preferably an all terrain type tire. Or a lead on a how to get western cyclone rims replicated in 16 inch or 17 inch. Trying to keep truck as close to original as possible and keep the look as close as possible. Thank you for any help!!
Mon, 04 Jul 2022 14:33:04 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Monday, July 4, 2022

Simple mods

Hi, new to the forum, wanna find out where I can purchase a front lip for my 22 charger gt
Hi, new to the forum, wanna find out where I can purchase a front lip for my 22 charger gt
Tue, 05 Jul 2022 01:28:14 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Passenge sliding door wont close completely,

I had to change out my door lock actuator on my passengers side electric sliding door which was a big "Headache" but was done! I had to literally take off the passenger sliding door off completely to work on the actuator without moving the glass as other forums suggested but can be done without moving the glass. After removing all the wiring and bolts, window motor etc...and removing the whole plastic cover to get to the door lock actuator and replacing it with a used one from "Pull A Part"... Passenge sliding door wont close completely,
I had to change out my door lock actuator on my passengers side electric sliding door which was a big "Headache" but was done! I had to literally take off the passenger sliding door off completely to work on the actuator without moving the glass as other forums suggested but can be done without moving the glass. After removing all the wiring and bolts, window motor etc...and removing the whole plastic cover to get to the door lock actuator and replacing it with a used one from "Pull A Part"...

Passenge sliding door wont close completely,
Mon, 04 Jul 2022 19:17:25 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

92 Dakota 3.9L blowing large amount of water out exhaust

Good day All, I have 92 with the 3.9L Magnum blowing a ton of water out the exhaust. It' not overheating so I don't think it's the head gaskets. No water in oil. I have read the intake plenums are known for warping on these engines. Looking for some guidance..Thanks in advance!
Good day All, I have 92 with the 3.9L Magnum blowing a ton of water out the exhaust. It' not overheating so I don't think it's the head gaskets. No water in oil. I have read the intake plenums are known for warping on these engines. Looking for some guidance..Thanks in advance!
Mon, 04 Jul 2022 16:57:43 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Introducing the DIY Solutions Brand

The DIY Solutions brand quickly gains popularity among "do it yourself" enthusiasts who love fixing and upgrading their vehicles with their own hands. With rising prices on gas and services, a new way to save some money is more than welcome. The company uses high-quality materials and modern equipment to manufacture its products, and the prices are very reasonable. Using DIY Solutions parts and accessories, you can...​ Introducing the DIY Solutions Brand

The DIY Solutions brand quickly gains popularity among "do it yourself" enthusiasts who love fixing and upgrading their vehicles with their own hands. With rising prices on gas and services, a new way to save some money is more than welcome. The company uses high-quality materials and modern equipment to manufacture its products, and the prices are very reasonable.

Using DIY Solutions parts and accessories, you can...​

Introducing the DIY Solutions Brand
Mon, 04 Jul 2022 16:46:39 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

What state are you in?

I've been reading posts for the first time in a few months and people asking for parts for their vehicle and they don't seem to put at least what state they're in so if someone's nearby that could help them out. Or they're way too far away asking for a large part that would cost effectively make it impossible... The closest I can tell is most of these people are in the United States according to the flag next to them... One guy wants tires I would probably give them to him if he was close... What state are you in?
I've been reading posts for the first time in a few months and people asking for parts for their vehicle and they don't seem to put at least what state they're in so if someone's nearby that could help them out. Or they're way too far away asking for a large part that would cost effectively make it impossible... The closest I can tell is most of these people are in the United States according to the flag next to them...
One guy wants tires I would probably give them to him if he was close...

What state are you in?
Mon, 04 Jul 2022 14:48:31 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Sunday, July 3, 2022

Help Needed - Searching for a truck

I am seeking the location and owner of my old truck. It is a 78 Macho Power Wagon replica - should be titled as a 1979. Viper yellow, 440 - auto, newer 5x5.5 bolt circle axles.Weld Typhoon wheels, 35" BFG AT tires.... I built the truck back in late 1990's. Last pics I have had a 1999 tab on the plate. This is a photo of the truck I found someone posted here in 2005......
I am seeking the location and owner of my old truck. It is a 78 Macho Power Wagon replica - should be titled as a 1979. Viper yellow, 440 - auto, newer 5x5.5 bolt circle axles.Weld Typhoon wheels, 35" BFG AT tires.... I built the truck back in late 1990's. Last pics I have had a 1999 tab on the plate. This is a photo of the truck I found someone posted here in 2005......

Mon, 04 Jul 2022 04:05:15 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

94 Ram Van B250 Heat exchanger?????

Where can I locate the "heat exchanger" in my 1994 Dodge Ram Van B250? All issues point to this item, but I'm having one hell of a time finding it! Thank you in advance!
Where can I locate the "heat exchanger" in my 1994 Dodge Ram Van B250? All issues point to this item, but I'm having one hell of a time finding it! Thank you in advance!
Mon, 04 Jul 2022 00:40:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

79 W150 dies when A/C on and at idle

I have a 79 W150 Power Wagon with 360 engine. Everything runs smooth and truck could sit and idle all day. When I turn on the A/C and come to a stop it will idle rough and eventually die. Assume this is something simple, but can't figure it out.
I have a 79 W150 Power Wagon with 360 engine. Everything runs smooth and truck could sit and idle all day.

When I turn on the A/C and come to a stop it will idle rough and eventually die. Assume this is something simple, but can't figure it out.
Sun, 03 Jul 2022 19:21:41 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2010 Dodge Grand Caravan codes

I have a 2010 Dodge grand Caravan SXT code PO 404 PO 406 I replace EGR valve but the 06 code remains what should I look for
I have a 2010 Dodge grand Caravan SXT code PO 404 PO 406 I replace EGR valve but the 06 code remains what should I look for
Sun, 03 Jul 2022 18:27:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Dumbfounded off-grid

1. I'm 70. 2. Not too stupid. 3. 1977 dodge power wagon 4 speed, 4 wheel drive, warn lockers. 4. Parked overnight. Won't start. New coil. Won't start. No fire. Newer cap and rotor. whadafuk over.
1. I'm 70.
2. Not too stupid.
3. 1977 dodge power wagon 4 speed, 4 wheel drive, warn lockers.
4. Parked overnight. Won't start. New coil. Won't start. No fire. Newer cap and rotor.
whadafuk over.
Sun, 03 Jul 2022 15:45:03 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2012 Dodge Charger 3.6 overheating

2012 Dodge Charger SXT 3.6 Driving and noticed temp getting around 225 pulled over and no leaks drove it home temp got to 235 and water overflowed. Changed thermostat Changed water pump Changed radiator By passed heater core and still wants to run hot Disconnected AC fuse (weird the AC button don't shut off the pump ?) but still wanted to run hot . Changed the tee connection heater hoses in back (because had some wetness around it ) Before all this the... 2012 Dodge Charger 3.6 overheating
2012 Dodge Charger SXT 3.6

Driving and noticed temp getting around 225 pulled over and no leaks drove it home temp got to 235 and water overflowed.

  1. Changed thermostat
  2. Changed water pump
  3. Changed radiator
  4. By passed heater core and still wants to run hot
  5. Disconnected AC fuse (weird the AC button don't shut off the pump ?) but still wanted to run hot .
  6. Changed the tee connection heater hoses in back (because had some wetness around it )
  7. Before all this the...

2012 Dodge Charger 3.6 overheating
Sun, 03 Jul 2022 13:59:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Saturday, July 2, 2022

2012 ram 1500 transmission 545RFI

My Rams transmission bluw the the containment rail, holding the values into the valve body. After towing it to the dealer I was told this trans was no longer available! I can put the valves back in and replace the rail and screws but I was told that the trans. could have gotten contaminated and the clutch plates will go out next. Has any of you guys run into this problem? Thanks
My Rams transmission bluw the the containment rail, holding the values into the valve body. After towing it to the dealer I was told this trans was no longer available! I can put the valves back in and replace the rail and screws but I was told that the trans. could have gotten contaminated and the clutch plates will go out next. Has any of you guys run into this problem? Thanks
Sun, 03 Jul 2022 04:17:23 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Rear veiw mirror HELP PlZ

I have a 2012 srt8 dodge charger I'm trying to replace the rear view mirror. I can't find a picture or detailed video on it. i cant find one thats my year or close to compare. Can't figure out if previous owner put it together right it doesn't look right from the front took the water sensor out to clean the glue off it. Sickens how people repair things it's sad. If anyone could take a pictures of the same year or up to 2014 or if you have replaced one if i have the right water sensor and if... Rear veiw mirror HELP PlZ
I have a 2012 srt8 dodge charger I'm trying to replace the rear view mirror. I can't find a picture or detailed video on it. i cant find one thats my year or close to compare. Can't figure out if previous owner put it together right it doesn't look right from the front took the water sensor out to clean the glue off it. Sickens how people repair things it's sad.

If anyone could take a pictures of the same year or up to 2014 or if you have replaced one if i have the right water sensor and if...

Rear veiw mirror HELP PlZ
Sat, 02 Jul 2022 23:55:35 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Voltage spike broke head lights.

Hello all, I have a high powered stereo in my 2011 grand caravan. I have a high output alt with external regulator that went bad and voltage spiked to about 18 volts. Now my high beams stay on and one head light when car is off and key fob is out. What could be the problem and what to do to get this fixed. Google search has not helped.
Hello all,
I have a high powered stereo in my 2011 grand caravan. I have a high output alt with external regulator that went bad and voltage spiked to about 18 volts.
Now my high beams stay on and one head light when car is off and key fob is out.
What could be the problem and what to do to get this fixed.
Google search has not helped.
Sat, 02 Jul 2022 19:14:59 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

91 W150 - Bleed new calipers - still no brakes?????? Help

It's been a while since I posted. I used to have an 09 hemi that I loved but had to get rid of it. I bought my dads 91 W150 2 yrs ago. I just had a caliper hang up on me. So I bought pads rotors and calipers. I just did the job (minus the rotors b/c they were fine). I only drive it maybe 500-700 miles a year. I bleed the brakes and the pedal goes to the floor. I bet I pumped about 25 times on each side. Still no breaks and now the brake warning light comes on once and a while in that... 91 W150 - Bleed new calipers - still no brakes?????? Help
It's been a while since I posted. I used to have an 09 hemi that I loved but had to get rid of it.

I bought my dads 91 W150 2 yrs ago. I just had a caliper hang up on me. So I bought pads rotors and calipers. I just did the job (minus the rotors b/c they were fine). I only drive it maybe 500-700 miles a year. I bleed the brakes and the pedal goes to the floor. I bet I pumped about 25 times on each side. Still no breaks and now the brake warning light comes on once and a while in that...

91 W150 - Bleed new calipers - still no brakes?????? Help
Sat, 02 Jul 2022 17:35:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

AUTO SHUT DOWN RELAY

I have a 1991 Dodge b250 with the 318 engine. When I bought the van about 8 years ago, I saw that a relay harness , grey in colour had no relay attached. There was a single red wire going into it where pin 30 should go. The attached image shows the layout. I am trying to find out which relay is the auto shut down. There is one near the battery which has a relay attached and then there is one close to the starter relay without a relay attached.. When I turn ignition on, the check engine... AUTO SHUT DOWN RELAY
I have a 1991 Dodge b250 with the 318 engine. When I bought the van about 8 years ago, I saw that a relay harness , grey in colour had no relay attached. There was a single red wire going into it where pin 30 should go. The attached image shows the layout. I am trying to find out which relay is the auto shut down. There is one near the battery which has a relay attached and then there is one close to the starter relay without a relay attached.. When I turn ignition on, the check engine...

AUTO SHUT DOWN RELAY
Sat, 02 Jul 2022 17:17:25 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Leak

Have an 02 1500 5.9 leaking from bottom of engine but I drove it about 20 miles and it didn't overheat help please
Have an 02 1500 5.9 leaking from bottom of engine but I drove it about 20 miles and it didn't overheat help please
Sat, 02 Jul 2022 17:09:19 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2003 ram 1500 5.7 won’t start

Hello. I'm new here. I'm having an issue with my ram 1500. I reset the PCM, following instructions I found on another post, by removing the fuse (#19) and now the truck only cranks but won't start. I've disconnected the negative battery cable and let it set for a few minutes but it still does the same. Any suggestions? Thanks
Hello. I'm new here. I'm having an issue with my ram 1500. I reset the PCM, following instructions I found on another post, by removing the fuse (#19) and now the truck only cranks but won't start. I've disconnected the negative battery cable and let it set for a few minutes but it still does the same. Any suggestions? Thanks
Sat, 02 Jul 2022 16:03:13 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2000 Dodge Dakota vibration at idle?

Hi. I own a 2000 Dodge Dakota SLT crew cab, with the automatic and 4wd, and has the 4.7 liter hemi. Has 190k miles on it, so I don't stress it a lot. Starts up and runs fine, and gas mileage is very good. Yesterday morning, got in and traveled to work (about 15 miles). Truck ran fine, but as I pulled into the parking lot, and rpm's dropped to idle, there was a vibration in the motor, like a had lost the balancer, and I could feel each power stroke. Temperatures and pressures were fine, and... 2000 Dodge Dakota vibration at idle?
Hi. I own a 2000 Dodge Dakota SLT crew cab, with the automatic and 4wd, and has the 4.7 liter hemi. Has 190k miles on it, so I don't stress it a lot. Starts up and runs fine, and gas mileage is very good.
Yesterday morning, got in and traveled to work (about 15 miles). Truck ran fine, but as I pulled into the parking lot, and rpm's dropped to idle, there was a vibration in the motor, like a had lost the balancer, and I could feel each power stroke. Temperatures and pressures were fine, and...

2000 Dodge Dakota vibration at idle?
Sat, 02 Jul 2022 13:21:36 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Friday, July 1, 2022

Ran across something I haven't seen before.

My father bought a 2005 Grand Caravan SXT. 110,000 miles on it. Thing is fully loaded. He got it for a great price because of a brake problem. I replaced both front hoses, both front calipers, pads, both front rotors, brake booster, and master cylinder. The front calipers locked up again. I figured maybe they were defective because they were remanufactured. So I replaced them a second time, but I'm still having the same issue with the front calipers seizing up and not releasing. The only... Ran across something I haven't seen before.
My father bought a 2005 Grand Caravan SXT. 110,000 miles on it. Thing is fully loaded. He got it for a great price because of a brake problem.
I replaced both front hoses, both front calipers, pads, both front rotors, brake booster, and master cylinder.
The front calipers locked up again. I figured maybe they were defective because they were remanufactured. So I replaced them a second time, but I'm still having the same issue with the front calipers seizing up and not releasing.
The only...

Ran across something I haven't seen before.
Fri, 01 Jul 2022 09:59:28 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N