2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 985
5. Turn OFF the ignition for 60 seconds.
6. Turn ON the ignition.
7. If the repair was related to a DTC, duplicate the Conditions for Running the DTC and use the Freeze Frame/Failure Records, if applicable, in
order to verify the DTC does not reset. If the DTC resets or another DTC is present, refer to the Diagnostic Trouble Code (DTC) List -
Vehicle (See: Diagnostic Trouble Code Descriptions/Diagnostic Trouble Code (DTC) List - Vehicle) and perform the appropriate diagnostic
procedure.
C0625
DTC C0615, C0620, C0625, or C0630
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptors
DTC C0615 08
- Left Front Position Sensor Circuit - Signal Invalid
DTC C0615 55
- Left Front Position Sensor Circuit - Expected Number Of Transitions Not Reached
DTC C0620 08
- Right Front Position Sensor Circuit - Signal Invalid
DTC C0620 55
- Right Front Position Sensor Circuit - Expected Number Of Transitions Not Reached
DTC C0625 08
- Left Rear Position Sensor Circuit - Signal Invalid
DTC C0625 55
- Left Rear Position Sensor Circuit - Expected Number Of Transitions Not Reached
DTC C0630 08
- Right Rear Position Sensor Circuit - Signal Invalid
DTC C0630 55
- Right Rear Position Sensor Circuit - Expected Number Of Transitions Not Reached
Diagnostic Fault Information
