2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 419
DTC Descriptors
DTC B1289 01
- Video Display Brightness Control Signal Short to Battery
DTC B1289 02
- Video Display Brightness Control Signal Short to Ground
DTC B1289 04
- Video Display Brightness Control Signal Open Circuit
Diagnostic Fault Information
Circuit/System Description
The radio can control the video display brightness on vehicles equipped with rear seat entertainment (RSE) video. The radio varies a pulse with
modulated (PWM) signal to the rear entertainment video screen to command the screen brightness to the desired level.
Conditions for Running the DTC
* Ignition ON.
* Battery voltage must be between 9-16 volts.
Conditions for Setting the DTC
The DTC will set when the radio detects a short to voltage, short to ground, or an open/high resistance in the video display brightness control
circuit 400 ms after the radio activates the remote enable circuit.
Action Taken When the DTC Sets
The radio sets the DTC and defaults the video display to full brightness.
Conditions for Clearing the DTC
* The condition responsible for setting the DTC no longer exists.
* A history DTC will clear once 100 consecutive malfunction-free ignition cycles have occurred.
Reference Information
Schematic Reference
Video System Schematics (See: Accessories and Optional Equipment/Diagrams/Electrical Diagrams/Video System Schematics)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Video Entertainment System Description and Operation (Non-Headrest DVD Systems) (See: Accessories and Optional Equipment/Description
and Operation/Video Entertainment System Description and Operation (Non-Headrest DVD Systems))Video Entertainment System Description
and Operation (Dual Headrest DVD Systems) (See: Accessories and Optional Equipment/Description and Operation/Video Entertainment System
Description and Operation (Dual Headrest DVD Systems))
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
