2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1733
P0970
The TCM detects a short to ground on the clutch PC solenoid 3 control circuit for 1 second.
P0971
The TCM detects an open or short to voltage on the clutch PC solenoid 3 control circuit for 1 second.
Action Taken When the DTC Sets
P0969
* DTC P0969 is a Type C DTC.
* The TCM freezes transmission adaptive functions to the low and reverse clutch and 4-5-6 clutch.
P0970 or P0971
* DTCs P0970 and P0971 are Type A DTCs.
* The TCM limits the transmission to reverse and 5th gear.
* The TCM inhibits torque converter clutch (TCC).
* The TCM commands maximum line pressure.
* The TCM freezes transmission adaptive functions.
* The TCM turns the high side driver off.
* The TCM inhibits manual shifting of forward gears.
Conditions for Clearing the DTC
* DTC P0969 is a Type C DTC.
* DTCs P0970 and P0971 are Type A DTCs.
Reference Information
Connector End View Reference
* Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)
* Inline Harness Connector End Views (See: Diagrams/Connector Views/Multiple Junction Connector/Connector End Views By Number)
Description and Operation
Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/6T70/6T75 -
Automatic Transmission/Transmission General Description)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code
(DTC) Type Definitions)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information
Special Tools
DT-47825-20 Adapter Harness
Circuit/System Verification
1. Operate the vehicle in second gear long enough to ensure at least a 3掳C (5掳F) rise in TCM temperature, then operate the vehicle in Park for 5
seconds.
2. Operate the vehicle in drive range. Allow the transmission to shift through all forward gear ranges. Verify with a scan tool the following test
status parameters display OK:
* PC Sol. 3 Perf. Test Status
* PC Sol. 3 Ckt. High Voltage Test Status
