2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1780
Typical Scan Tool Data
Circuit/System Description
When the vehicle is stopped in range D, the transmission enters a neutral condition by releasing the clutch C1. By reducing drag loss of the torque
converter, the load on the engine is lightened, fuel economy is enhanced, and idling vibration is reduced.
Conditions for Running the DTC
P1702, P1703, P1704
* The ignition voltage is between 10.2-15.5 V.
* The engine speed is greater than 400 RPM for 2 s.
* The transmission is not in emergency mode.
* Driving in D range.
* Transmission control module (TCM) communication is normal.
* Transmission fluid temperature is more than 10掳C (50掳F).
Conditions for Setting the DTC
P1702
* Clutch C1 hydraulic pressure is less than 26 kPa (3.8 PSI).
* Input revolution is less than 400 RPM for more than 5 s.
P1703
* Clutch C1 in neutral control
* Clutch C1 hydraulic pressure is more than 350 kPa (51 PSI).
* Input revolution is more than 400 RPM for more than 0.6 s.
P1704
* Clutch C1 apply control
* C1 hydraulic pressure command value is more than 300 kPa (44 PSI).
* Determined after 1 time lasting more than 0.3 s.
Action Taken When the DTC Sets
P1702, P1703
* DTCs P1702, P1703 are Type C DTC.
* No self learning function
* No Neutral control
* No adaptive shift
* Inhibit of Neutral control and garage shift control (N-D, D-N, N-R, R-N)
P1704
* DTC P1704 is Type B DTC.
* Torque limitation
* The TCM turns OFF all solenoids.
* The TCM allows the vehicle to operate only in second gear and "R" range after a stop.
Conditions for Clearing the DTC
