Repair problems

So I have vibrations in the steering wheel from speeds of 49-60 then stops once I hit round 65 ish. in the past year I've replaced the front hub assembly's, u joints, upper and Lowerballs joints, outer tie rod ends, and front struts. Can anybody help me out on trying to pin point the problem before I dump a bunch of time and money into stuff that doesn't need fixing?

So I have vibrations in the steering wheel from speeds of 49-60 then stops once I hit round 65 ish.
in the past year I've replaced the front hub assembly's, u joints, upper and Lowerballs joints, outer tie rod ends, and front struts. Can anybody help me out on trying to pin point the problem before I dump a bunch of time and money into stuff that doesn't need fixing?

Thu, 01 Dec 2022 01:52:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2004 5.7 Hemi Ram 1500 - Need help with rough running and P0141 and P0161 error codes

Guys, Need some help diagnosing a rough running problem with my truck. Here's the timeline of events: 1) Got an engine light and error code for drivers side O2 sensor, replaced sensor. Got the same code again, replaced the cat this time. 2) When leaving muffler shop, the truck started running really rough. Took back to shop, they ran the codes and it had a random misfire code. Shop suggested changing plugs and wires. 3) Plugs and wire had 170K on them, so changed both, along with EGR... 2004 5.7 Hemi Ram 1500 - Need help with rough running and P0141 and P0161 error codes

Guys,

Need some help diagnosing a rough running problem with my truck. Here's the timeline of events:

1) Got an engine light and error code for drivers side O2 sensor, replaced sensor. Got the same code again, replaced the cat this time.
2) When leaving muffler shop, the truck started running really rough. Took back to shop, they ran the codes and it had a random misfire code. Shop suggested changing plugs and wires.
3) Plugs and wire had 170K on them, so changed both, along with EGR...

2004 5.7 Hemi Ram 1500 - Need help with rough running and P0141 and P0161 error codes

Tue, 29 Nov 2022 22:38:05 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

MAP/TPS problem NOT BOTH!

2003 ram 1500 4.7 liter 5 speed 4x4 If I have both the TPS and the MAP plugged in, it throws a P0121 code If I unplug the MAP it only throws a P0108 code Both sensors are NEW I have done a continuity test on all the wires from both sensors back to the ECU and does not seem like I have any cross over :/ ANY HELP would be wonderful

2003 ram 1500
4.7 liter 5 speed
4x4

If I have both the TPS and the MAP plugged in, it throws a P0121 code

If I unplug the MAP it only throws a P0108 code

Both sensors are NEW

I have done a continuity test on all the wires from both sensors back to the ECU and does not seem like I have any cross over :/

ANY HELP would be wonderful

Sun, 06 Nov 2022 23:06:54 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Cant remove brake drum on '67 Coronet

Star wheel adjuster is out to maximum travel and is now jammed. Can't get it to budge no matter what I do. Anyone dealt with this or have any ideas as to what I can do to get the drum off?

Star wheel adjuster is out to maximum travel and is now jammed. Can't get it to budge no matter what I do. Anyone dealt with this or have any ideas as to what I can do to get the drum off?

Sun, 06 Nov 2022 02:10:13 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Need HELP wiring a Keyless Entry system for an A.R.E. LSII Tonneau cover on my 2013 1500 Express

I just purchased a used LSII Cover for my truck. However the top came with the Keyless entry option that works with O.E.M. Key Fob and Tailgate lock. I cannot find any wiring information or diagrams online that explain this or even show pics. I dont even know if all of the wiring is there. Would appreciate any help.

I just purchased a used LSII Cover for my truck. However the top came with the Keyless entry option that works with O.E.M. Key Fob and Tailgate lock. I cannot find any wiring information or diagrams online that explain this or even show pics. I dont even know if all of the wiring is there. Would appreciate any help.

Sat, 05 Nov 2022 20:20:07 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Muffler swap

Recently swapped the O>E>M> Muffler on my 2013 1500 Express 1500 5.7 HEMI with a more aggressive sounding Vortek Muffler. Do I need to have the computer reflashed for the increased flow? Doesn't seem like the truck shifts the same since swap.

Recently swapped the O>E>M> Muffler on my 2013 1500 Express 1500 5.7 HEMI with a more aggressive sounding Vortek Muffler. Do I need to have the computer reflashed for the increased flow? Doesn't seem like the truck shifts the same since swap.

Sat, 05 Nov 2022 20:24:58 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1987 dodge D150 360 Mangrum/nv4500 swap

I have a 1987 dodge d150 I wanting to swap in a 95 360magnum with a nv4500 I have both the motor and transmission also a whole parts truck. I'm ordering the carburetor manifold for it and the fuel pump for the truck I just need to know what else ie. motor mounts, transmission mount, drive shaft length, etc. I'm pretty knowledgeable and this is not my first engine swap. And tips or tricks would be great. I'm trying to do this over leave so I'm order parts so they will be there when I get... 1987 dodge D150 360 Mangrum/nv4500 swap

I have a 1987 dodge d150 I wanting to swap in a 95 360magnum with a nv4500 I have both the motor and transmission also a whole parts truck. I'm ordering the carburetor manifold for it and the fuel pump for the truck I just need to know what else ie. motor mounts, transmission mount, drive shaft length, etc. I'm pretty knowledgeable and this is not my first engine swap. And tips or tricks would be great. I'm trying to do this over leave so I'm order parts so they will be there when I get...

1987 dodge D150 360 Mangrum/nv4500 swap

Sat, 05 Nov 2022 15:22:28 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2005 Dodge Ram 1500 Regular Cab

I have a 2005 dodge ram 1500 regular cab. It still has the factory radio in it but while it's playing the speakers will stop working until I turn it off and back on. Then they will stop playing again. I went to put an aftermarket stereo in and it did the same thing. Can someone tell me what is wrong with it? I am trying to fix it without having to pay a shop to do it for me.

I have a 2005 dodge ram 1500 regular cab. It still has the factory radio in it but while it's playing the speakers will stop working until I turn it off and back on. Then they will stop playing again. I went to put an aftermarket stereo in and it did the same thing. Can someone tell me what is wrong with it? I am trying to fix it without having to pay a shop to do it for me.

Sat, 05 Nov 2022 01:23:07 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

B250 fix

How do u fix a 318 with a broken roller lifter retainer (spider)?anybody? 360 are the same ,why u can't buy this part?

How do u fix a 318 with a broken roller lifter retainer (spider)?anybody?
360 are the same ,why u can't buy this part?

Fri, 04 Nov 2022 20:38:52 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Dayco Timing Belt too Tight &Alignment 2002 2.4

Installing the Dayco retrofit kit to my 2002 2.4 ser no: 1B4GP25B82B655172. Kit uses the original size timing belt. Kit replaces the tensioner with an upgraded design.Timing marks are supposed to align straight across on the cam sprockets. The tolerance is so close that I can only get it on by loosening both the idler pulley and the tensioner. Then I find that my alignment is off by a notch. Is there a procedure or trick to getting it on? The Dayco timing belt is definitely way too tight... Dayco Timing Belt too Tight &Alignment 2002 2.4

Installing the Dayco retrofit kit to my 2002 2.4 ser no: 1B4GP25B82B655172. Kit uses the original size timing belt. Kit replaces the tensioner with an upgraded design.Timing marks are supposed to align straight across on the cam sprockets. The tolerance is so close that I can only get it on by loosening both the idler pulley and the tensioner. Then I find that my alignment is off by a notch. Is there a procedure or trick to getting it on? The Dayco timing belt is definitely way too tight...

Dayco Timing Belt too Tight &Alignment 2002 2.4

Fri, 04 Nov 2022 16:49:06 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

FCA Stop-drive Statement

Greetings everyone, Dodge Cares would like to bring awareness to a recent stop-drive announcement for U.S.-market owners/users of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans. You can read more about this development below: FCA US LLC urgently warns U.S.-market owners or custodians of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans who have not yet... FCA Stop-drive Statement

Greetings everyone,

Dodge Cares would like to bring awareness to a recent stop-drive announcement for U.S.-market owners/users of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans. You can read more about this development below:

FCA US LLC urgently warns U.S.-market owners or custodians of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans who have not yet...

FCA Stop-drive Statement

Fri, 04 Nov 2022 14:49:41 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

FCA Stop-drive Statement

Greetings everyone, Dodge Cares would like to bring awareness to a recent stop-drive announcement for U.S.-market owners/users of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans. You can read more about this development below: FCA US LLC urgently warns U.S.-market owners or custodians of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans who have not yet... FCA Stop-drive Statement

Greetings everyone,

Dodge Cares would like to bring awareness to a recent stop-drive announcement for U.S.-market owners/users of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans. You can read more about this development below:

FCA US LLC urgently warns U.S.-market owners or custodians of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans who have not yet...

FCA Stop-drive Statement

Fri, 04 Nov 2022 14:52:22 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

FCA Stop-drive Statement

Greetings everyone, Dodge Cares would like to bring awareness to a recent stop-drive announcement for U.S.-market owners/users of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans. You can read more about this development below: FCA US LLC urgently warns U.S.-market owners or custodians of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans who have not yet... FCA Stop-drive Statement

Greetings everyone,

Dodge Cares would like to bring awareness to a recent stop-drive announcement for U.S.-market owners/users of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans. You can read more about this development below:

FCA US LLC urgently warns U.S.-market owners or custodians of model-year 2005-2010 Dodge Magnum station wagons, Dodge Challenger coupes, and Dodge Charger and Chrysler 300 sedans who have not yet...

FCA Stop-drive Statement

Fri, 04 Nov 2022 14:54:32 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Will tire size 285-70-r17 fit on a 2011 dodge ram 1500

Hello I am a fist time truck owner and I'm trying to see if tire size 285-70-r17 will fit my truck original tire size is 275 -70-r17 and my engine is a 5.7 hemi

Hello I am a fist time truck owner and I'm trying to see if tire size 285-70-r17 will fit my truck original tire size is 275 -70-r17 and my engine is a 5.7 hemi

Fri, 04 Nov 2022 13:56:03 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Over head Console

In the over head console, there is a small LED lamp in front of the sliding window switch. Is there a switch which controls that lamp. Currently it is on all the time when the ignition is on. 2014 Laramie

In the over head console, there is a small LED lamp in front of the sliding window switch. Is there a switch which controls that lamp. Currently it is on all the time when the ignition is on.
2014 Laramie

Fri, 04 Nov 2022 12:17:08 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1979 W150 Fuel Tank

I am needing to replace the fuel tank on my 1979 W150 and having trouble finding one. Anyone know where I can find a new tank?

I am needing to replace the fuel tank on my 1979 W150 and having trouble finding one. Anyone know where I can find a new tank?

Fri, 04 Nov 2022 11:02:35 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Vacuum check valves

Want to change the vacuum line check valves on my 98 ram 1500 4x4 but cannot find any that fit. Did they quit making parts for this truck or what. Anybody have advice.

Want to change the vacuum line check valves on my 98 ram 1500 4x4 but cannot find any that fit. Did they quit making parts for this truck or what. Anybody have advice.

Fri, 04 Nov 2022 02:42:09 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

under dash wiring harness

i just out the cab on my 2000 dodge 3500 diesel. the cab i put on it is a gas cab and i didn't change wiring harness.. the only thing that does not fit is the 4 pin plug under the dash. it has no mate to plug into.. will i have to change the dash harness to get things going.. ive never ran into this before..

i just out the cab on my 2000 dodge 3500 diesel. the cab i put on it is a gas cab and i didn't change wiring harness.. the only thing that does not fit is the 4 pin plug under the dash. it has no mate to plug into.. will i have to change the dash harness to get things going.. ive never ran into this before..

Fri, 04 Nov 2022 00:43:09 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Secret start method

Dodge ram b250 1985 318. Sometimes it won't turnover. I turn the ignition on where you can hear the buzzer. Roll up windows. Turn on lights etc. But do not start. I then pull the negative cord to the battery. Something clicks. Put the negative cord back on the battery terminal. And it starts. If not... repeat. If you know what's wrong please help. But this method might get you out of a tough spot.

Dodge ram b250 1985 318. Sometimes it won't turnover. I turn the ignition on where you can hear the buzzer. Roll up windows. Turn on lights etc. But do not start. I then pull the negative cord to the battery. Something clicks. Put the negative cord back on the battery terminal. And it starts. If not... repeat.
If you know what's wrong please help. But this method might get you out of a tough spot.

Thu, 03 Nov 2022 23:48:09 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Free parts for dodge ram b250 1985

Lots of decals. Prospector. Dodge ram. Hinges various reflectors. Side mirror. It's an average size box. I've taken everything I need. Pick em up or make a deal

Lots of decals. Prospector. Dodge ram. Hinges various reflectors. Side mirror. It's an average size box. I've taken everything I need. Pick em up or make a deal

Thu, 03 Nov 2022 23:53:06 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1937 3/4 Ton 6 lug wheel

Any Ideal where I can find a replacement wheel ? 16 inch 6 lug split rim for a 1937 3/4 ton

Any Ideal where I can find a replacement wheel ? 16 inch 6 lug split rim for a 1937 3/4 ton

Thu, 03 Nov 2022 21:27:39 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Crank with no start

Hello everyone hope all is fine. Need help asap. I have a 2006 dodge grand caravan 3.3 v6. Recently the windows wipers blower and radio stopped working if the van was running BUT if i switched the vehicle off and turned the key all the way back they work. I replaced the ignition switch then everything started to work. I shut the van off that night and went to bed. Next morning i tried to start it to go to work but it just cranks and dosent start. Its almost as if fuel isnt getting to the... Crank with no start

Hello everyone hope all is fine. Need help asap. I have a 2006 dodge grand caravan 3.3 v6. Recently the windows wipers blower and radio stopped working if the van was running BUT if i switched the vehicle off and turned the key all the way back they work. I replaced the ignition switch then everything started to work. I shut the van off that night and went to bed. Next morning i tried to start it to go to work but it just cranks and dosent start. Its almost as if fuel isnt getting to the...

Crank with no start

Thu, 03 Nov 2022 18:55:22 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Edd's got a 1994 Grand Caravan Sport

any one know anything about 1st and second gen 41TE/A604 transmissions?

any one know anything about 1st and second gen 41TE/A604 transmissions?

Thu, 03 Nov 2022 17:48:38 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

1.3 G's Autocrossing the 300

Hi, Here's a short video from my latest Auto-X with the 300. Hope you enjoy!

Hi,

Here's a short video from my latest Auto-X with the 300. Hope you enjoy!

Wed, 02 Nov 2022 04:02:50 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Battery light

Battery light came on. I cleaned all connection throughly. Multimeter show 12.5 volts not running and 13.9 running. The battery is only 2 years old but you never know. Any thoughts. Thanks

Battery light came on. I cleaned all connection throughly. Multimeter show 12.5 volts not running and 13.9 running. The battery is only 2 years old but you never know. Any thoughts. Thanks

Thu, 03 Nov 2022 14:53:44 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Roll pan, jumpseat and 2” spacers and black mesh grille for sale!!! Asking for $250 for both Shipping available if needed

Thu, 03 Nov 2022 14:34:34 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Cutting access in the floor to replace fuel pump

I have a 1995 B3500 van with a 36 gallon gas tank. It's a real PITA to replace the fuel pump. My idea is to loosen the straps enough that the tank lowers enough to slide a piece of plate steel between the floor and the tank and then cut a hole in the floor with an angle grinder to access it. I would then add metal to put the patch back in and screw the cutout floor back on. Has anyone tried this? It would have been nice if Dodge would have done this.

I have a 1995 B3500 van with a 36 gallon gas tank. It's a real PITA to replace the fuel pump. My idea is to loosen the straps enough that the tank lowers enough to slide a piece of plate steel between the floor and the tank and then cut a hole in the floor with an angle grinder to access it. I would then add metal to put the patch back in and screw the cutout floor back on. Has anyone tried this? It would have been nice if Dodge would have done this.

Wed, 02 Nov 2022 18:50:18 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

91 B250 Van auto trans tail shaft

Has anybody replaced the extension housing bushing or tail-shaft bushing on a Dodge B250 van without removing the extension housing? I know there's tools available for this but trying to research the tool has been a hassle.

Has anybody replaced the extension housing bushing or tail-shaft bushing on a Dodge B250 van without removing the extension housing? I know there's tools available for this but trying to research the tool has been a hassle.

Wed, 02 Nov 2022 16:45:28 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

2008 1500 Megacab - issues filling up gas tank

So I haven't been driving my Megacab much. It sat outside for 3 weeks and when I went to fill it up the pump would just click off like it does when its full. Moved the hose to different positions but it would only take gas real slow, stood there holding it for several minutes and only got 10 gallons. It did this at a second station as well. I was hoping it had a blocked vent somewhere, spiders nest, something but I can't find anything. Anyone know what I'm fighting?

So I haven't been driving my Megacab much. It sat outside for 3 weeks and when I went to fill it up the pump would just click off like it does when its full. Moved the hose to different positions but it would only take gas real slow, stood there holding it for several minutes and only got 10 gallons. It did this at a second station as well. I was hoping it had a blocked vent somewhere, spiders nest, something but I can't find anything. Anyone know what I'm fighting?

Wed, 02 Nov 2022 16:07:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

97 Dodge ram van 2500 6 cyl started back firing after replacing fuel pump can you please tell me why

97 Dodge ram van 2500 6 cyl backfires after replacing fuel pump can someone please tell me why

97 Dodge ram van 2500 6 cyl backfires after replacing fuel pump can someone please tell me why

Wed, 02 Nov 2022 13:58:13 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Autocrossing the 300

Hi, Here's a short video from my latest Auto-X with the 300. Hope you enjoy!

Hi,

Here's a short video from my latest Auto-X with the 300. Hope you enjoy!

Wed, 02 Nov 2022 04:02:50 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Power steering pump pulley

I am searching for a power steering pump pulley for my 2008 Ram 1500 four-wheel drive with 5.7 hemi. Anyone had this problem the pulley has came apart from the hub that is pressed onto the pump

I am searching for a power steering pump pulley for my 2008 Ram 1500 four-wheel drive with 5.7 hemi. Anyone had this problem the pulley has came apart from the hub that is pressed onto the pump

Wed, 02 Nov 2022 01:47:04 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

No spark Need HELP

So I have a 1984 dodge d150 with a 318. I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and... No spark Need HELP

So I have a 1984 dodge d150 with a 318.
I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and...

No spark Need HELP

Tue, 01 Nov 2022 22:45:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Both key fobs stopped working

Hello. I have a 2010 Caravan (base mode) and both key fobs stopped working (the previous owner said the 12v battery died at some point. I am not sure if it caused this though).The car starts fine but lock, unlock and panic buttons are not working. I changed the batteries but it did not make any difference. Any idead what it would be?

Hello. I have a 2010 Caravan (base mode) and both key fobs stopped working (the previous owner said the 12v battery died at some point. I am not sure if it caused this though).The car starts fine but lock, unlock and panic buttons are not working. I changed the batteries but it did not make any difference. Any idead what it would be?

Tue, 01 Nov 2022 23:01:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

No spark

So I have a 1984 dodge d150 with a 318. I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and... No spark

So I have a 1984 dodge d150 with a 318.
I was driving down the road and the lights went out because it blew a fuse. I replaced the fuse and drive farther and then the truck started sputtering and just died. Tried to crank it but no spark. Tried to bypass the ballast resistor still no spark. Tried to bypass to put positive straight to ignition coil positive still no spark. I had a problem earlier where the hot wire to the ignition coil was busted but it was fixed. I checked all the wires and...

No spark

Tue, 01 Nov 2022 22:45:12 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N

Mexican Spec 1980 Dodge Super Bee

By 1980 the name Super Bee was gone in the US. In Mexico it lasted a few more years. This is a 1980 model that is said to be restored. I think it is more that he made it nice. The 360 V8 has a few upgrades with the aluminum valve covers and intake manifold and the 4 barrel Holley carburetor. The car wears the special road wheels rarely seen in the US. The A/C even works which is also rare. If you want more information about this car please let me know. ... Mexican Spec 1980 Dodge Super Bee

By 1980 the name Super Bee was gone in the US.
In Mexico it lasted a few more years.
This is a 1980 model that is said to be restored.
I think it is more that he made it nice.
The 360 V8 has a few upgrades with the aluminum valve covers and intake manifold and the 4 barrel Holley carburetor.
The car wears the special road wheels rarely seen in the US.
The A/C even works which is also rare.

If you want more information about this car please let me know.

...

Mexican Spec 1980 Dodge Super Bee

Tue, 01 Nov 2022 22:15:22 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/tiQ4N