Friday, August 11, 2023

Dodge vehicles also use a set of diagnostic trouble codes (DTCs) to identify potential issues with various systems in the car.

As of my last update in September 2021, Dodge vehicles also use a set of diagnostic trouble codes (DTCs) to identify potential issues with various systems in the car. Dodge, being an American automotive brand, uses advanced diagnostic systems to assist in diagnosing and troubleshooting problems. The specific codes can vary based on the Dodge model, year, and the type of diagnostic system used. Here are some common Dodge diagnostic trouble codes:

1. P0101 - Mass or Volume Air Flow Circuit Range/Performance Problem
2. P0171 - System Too Lean (Bank 1)
3. P0172 - System Too Rich (Bank 1)
4. P0300 - Random/Multiple Cylinder Misfire Detected
5. P0301 - Cylinder 1 Misfire Detected
6. P0302 - Cylinder 2 Misfire Detected
7. P0303 - Cylinder 3 Misfire Detected
8. P0304 - Cylinder 4 Misfire Detected
9. P0420 - Catalyst System Efficiency Below Threshold (Bank 1)
10. P0430 - Catalyst System Efficiency Below Threshold (Bank 2)
11. P0442 - Evaporative Emission System Leak Detected (Small Leak)
12. P0455 - Evaporative Emission System Leak Detected (Gross Leak)
13. P0507 - Idle Control System RPM Higher Than Expected
14. P0601 - Internal Control Module Memory Check Sum Error
15. P0604 - Internal Control Module Random Access Memory (RAM) Error
16. P0606 - Control Module Internal Performance
17. P0607 - Control Module Performance
18. P0700 - Transmission Control System (MIL Request)
19. P0720 - Output Speed Sensor Circuit Malfunction
20. P0730 - Incorrect Gear Ratio
21. P0740 - Torque Converter Clutch Circuit/Open
22. P0743 - Torque Converter Clutch Circuit Electrical
23. P0748 - Pressure Control Solenoid A Electrical
24. P0750 - Shift Solenoid A Malfunction
25. P0755 - Shift Solenoid B Malfunction
26. P0760 - Shift Solenoid C Malfunction
27. P0765 - Shift Solenoid D Malfunction
28. P0770 - Shift Solenoid E Malfunction
29. P0888 - Transmission Relay Output Always Off
30. P0890 - Traction Control Module (TCM) Power Relay Sense Circuit Low

Please note that the specific diagnostic trouble codes can vary based on the Dodge model and the software version of the diagnostic system used. If you encounter any of these diagnostic codes on your Dodge vehicle, it is recommended to have a qualified mechanic or Dodge dealership diagnose and address the specific issue. Using professional diagnostic equipment ensures accurate readings and appropriate repairs.

Monday, July 10, 2023

Airlift airbags

I took these airbags off of my 2018 3500 ram I don't think that these will fit the 5Gens and the top bracket are missing but can easily find them on Etrailer.
I took these airbags off of my 2018 3500 ram I don't think that these will fit the 5Gens and the top bracket are missing but can easily find them on Etrailer.
Mon, 10 Jul 2023 07:13:01 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2500/3500 OEM Rims

I have rims that I took off of my 2018 3500 Ram OEM, these are in mint condition because when I bought the truck brand new I took them off within six months of purchase, they don't have any marks or scratches, local pickup with in the Seattle-Tacoma WA area.
I have rims that I took off of my 2018 3500 Ram OEM, these are in mint condition because when I bought the truck brand new I took them off within six months of purchase, they don't have any marks or scratches, local pickup with in the Seattle-Tacoma WA area.
Mon, 10 Jul 2023 07:09:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Sunday, July 9, 2023

Changed the turbo resenator

Changed the turbo resenator on a 2006 sprinter 3500.still no boost. Help please.
Changed the turbo resenator on a 2006 sprinter 3500.still no boost. Help please.
Mon, 10 Jul 2023 00:45:38 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Need answers

I have a 2019 ram 1500 slt classic with a 5.7 litter is there a throttle positioning sensor on this motor?
I have a 2019 ram 1500 slt classic with a 5.7 litter is there a throttle positioning sensor on this motor?
Sun, 09 Jul 2023 09:48:47 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

emission lines and rubber connectors

any help getting info on names for emission fitting/lines and where to find said parts (web site) to repair for codes p0442/p0455
any help getting info on names for emission fitting/lines and where to find said parts (web site) to repair for codes p0442/p0455
Sun, 09 Jul 2023 08:50:10 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Saturday, July 8, 2023

V10 swap 01 1500 Offroad Edition

I have three Rams. 1997 club cab 1500 5.9, 2001 quad cab 1500 5.9 Offroad Edition and a 99 quad cab 2500 8.0 donor truck. My 97 is a 426 stroker (yet to be realized) project. Modifications thus far-FI air gap intake manifold, 222/218/114 camshaft, fast bleed down lifters, hardened pushrods, stainless 1.7 rockers on Hughes Iron Ram 2.02/1.62 heads & long tube ceramic coated headers. It runs really well and alot better than stock but it has a long ways to go performance wise. We'll save that... V10 swap 01 1500 Offroad Edition
I have three Rams. 1997 club cab 1500 5.9, 2001 quad cab 1500 5.9 Offroad Edition and a 99 quad cab 2500 8.0 donor truck. My 97 is a 426 stroker (yet to be realized) project. Modifications thus far-FI air gap intake manifold, 222/218/114 camshaft, fast bleed down lifters, hardened pushrods, stainless 1.7 rockers on Hughes Iron Ram 2.02/1.62 heads & long tube ceramic coated headers. It runs really well and alot better than stock but it has a long ways to go performance wise. We'll save that...

V10 swap 01 1500 Offroad Edition
Sun, 09 Jul 2023 05:22:51 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

My trans plan...

No, not THAT kind of trans plan... I bought a 99 4wd 2500 V10 with 140k, well documented maintenance, beautiful interior, and a transmission issue he told me about up front. I drove it, found that after it's finally in 3rd or OD, it's fine. But getting it to shift correctly after it was warm was difficult. Moving the shifter in and out of D and high revving combos made it happen finally, but I still had a good feeling about the truck. The fluid level was quite high on the trans dipstick... My trans plan...
No, not THAT kind of trans plan...
I bought a 99 4wd 2500 V10 with 140k, well documented maintenance, beautiful interior, and a transmission issue he told me about up front.
I drove it, found that after it's finally in 3rd or OD, it's fine. But getting it to shift correctly after it was warm was difficult. Moving the shifter in and out of D and high revving combos made it happen finally, but I still had a good feeling about the truck. The fluid level was quite high on the trans dipstick...

My trans plan...
Sat, 08 Jul 2023 15:18:41 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Friday, July 7, 2023

So what do y'all think

Fuel pump is out. Drop the tank? Lift the bed up? Cut a joke in bed of truck?????
Fuel pump is out. Drop the tank? Lift the bed up? Cut a joke in bed of truck?????
Sat, 08 Jul 2023 00:44:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2010 Ram Wheel Bearing and Hub Assembly

So we've already replaced the front assemblies on my 2010 4WD Ram 1500. I'm looking to replace the rear assemblies (wheel bearing and hub assembly) but all I can find are assemblies listed as "front". Does it make a difference? Are the front and rear assemblies the same? Gotta replace 'em, they're talking to me ...
So we've already replaced the front assemblies on my 2010 4WD Ram 1500. I'm looking to replace the rear assemblies (wheel bearing and hub assembly) but all I can find are assemblies listed as "front". Does it make a difference? Are the front and rear assemblies the same? Gotta replace 'em, they're talking to me ...
Fri, 07 Jul 2023 19:30:23 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2006-2007 Sprinter Rear Sway Bar Bushings & Mounts

Hello everyone, Had a customer come in and needed some rear sway bar/stabilizer bushings and mounts because his mounts snapped. The mounts looked aftermarket, and those mounts snapping? Never seen that. The metal looked weak, and I COULD NOT FIND ANYTHING for it. Called Dodge and they told me the vin is a 2006 AND that it doesn't come with a rear sway bar. (2007 body 2006 chassis maybe) The bushings are a little over 31mm inside diameter and I have NO idea how to help this man. He bought... 2006-2007 Sprinter Rear Sway Bar Bushings & Mounts
Hello everyone,

Had a customer come in and needed some rear sway bar/stabilizer bushings and mounts because his mounts snapped.

The mounts looked aftermarket, and those mounts snapping? Never seen that. The metal looked weak, and I COULD NOT FIND ANYTHING for it. Called Dodge and they told me the vin is a 2006 AND that it doesn't come with a rear sway bar. (2007 body 2006 chassis maybe)

The bushings are a little over 31mm inside diameter and I have NO idea how to help this man. He bought...

2006-2007 Sprinter Rear Sway Bar Bushings & Mounts
Fri, 07 Jul 2023 17:08:00 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Problems During Cab Clearance lights install (BCM?)

So, I messed up during Installing Mopar Cab Clearance lights, after splicing the wire per the instructions into BCM Connector A, I didn't fully re-connect it. Not knowing that and re-connecting the battery, trying to start the truck is when Problems Started. 1. First problems were that the truck wouldn't start, Dash said to service Power Steering, air bag system, Electric brake System. one low beam light out. Scanner couldn't communicate with ECM. Doubled checked all the BCM connectors were... Problems During Cab Clearance lights install (BCM?)
So, I messed up during Installing Mopar Cab Clearance lights, after splicing the wire per the instructions into BCM Connector A, I didn't fully re-connect it.
Not knowing that and re-connecting the battery, trying to start the truck is when Problems Started.

1. First problems were that the truck wouldn't start, Dash said to service Power Steering, air bag system, Electric brake System. one low beam light out. Scanner couldn't communicate with ECM.
Doubled checked all the BCM connectors were...

Problems During Cab Clearance lights install (BCM?)
Fri, 07 Jul 2023 07:07:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Thursday, July 6, 2023

05 Dodge Magnum RT Overheating Issue

I need help diagnosing a problem with my 05 dodge magnum rt i tried everything starting with the radiator first cause it had a crack in it than went to replace the water pump,thermostat, coolant temp sensor as well but now i cant get coolant to flow to the water pump or even come out the bleeder valve of the water pump like most people with hemi's would do idk whats next on my list or dont know if there a airlock in the system somewhere & i cant get it flow not sure how to some one give me... 05 Dodge Magnum RT Overheating Issue
I need help diagnosing a problem with my 05 dodge magnum rt i tried everything starting with the radiator first cause it had a crack in it than went to replace the water pump,thermostat, coolant temp sensor as well but now i cant get coolant to flow to the water pump or even come out the bleeder valve of the water pump like most people with hemi's would do idk whats next on my list or dont know if there a airlock in the system somewhere & i cant get it flow not sure how to some one give me...

05 Dodge Magnum RT Overheating Issue
Fri, 07 Jul 2023 01:16:02 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Engine Swap Troubles 4.7l 05

Decided to engine swap my 05 4.7l 1500 4x4 pickup recently since the original motor has been suffering from a cracked head. Bought a 120k mile motor off of car part planet. When it came we noticed it cane out of a jeep. Had a shoterned water pump fan and diffrent oil dip stick. We swapped over all of our accessories and dropped in the motor smoothly. Not one plug didn't match up. We decided to use the throttle body and injectors that came with the motor since they had 50k less miles than the... Engine Swap Troubles 4.7l 05
Decided to engine swap my 05 4.7l 1500 4x4 pickup recently since the original motor has been suffering from a cracked head. Bought a 120k mile motor off of car part planet. When it came we noticed it cane out of a jeep. Had a shoterned water pump fan and diffrent oil dip stick. We swapped over all of our accessories and dropped in the motor smoothly. Not one plug didn't match up. We decided to use the throttle body and injectors that came with the motor since they had 50k less miles than the...

Engine Swap Troubles 4.7l 05
Thu, 06 Jul 2023 23:09:01 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Wednesday, July 5, 2023

1978 SHORT BED

I have a excellent pickup box off a 1978 W150. No dents great tailgate and no rust. Also comes with bed rails and rear window guard. Want it to go to another Dodge guy $300.00 located in Montrose, Colorado [ATTACH... 1978 SHORT BED
I have a excellent pickup box off a 1978 W150. No dents great tailgate and no rust. Also comes with bed rails and rear window guard.

Want it to go to another Dodge guy $300.00 located in Montrose, Colorado
[ATTACH...

1978 SHORT BED
Thu, 06 Jul 2023 00:34:26 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

New Tailgate

Brand new Dodge Dakota tailgate for sale, make offer.
Brand new Dodge Dakota tailgate for sale, make offer.
Wed, 05 Jul 2023 21:38:24 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

expansion plug on head

The expansion plug poped out of my 318 1987 D150 today on passenger side rear. Can I replace it with the rubber expansion style the you can slip in and tighten up the center bolt. Do not want to pull the enging for a freeze plug . Any help or ideas ?
The expansion plug poped out of my 318 1987 D150 today on passenger side rear.
Can I replace it with the rubber expansion style the you can slip in and tighten up the center bolt.
Do not want to pull the enging for a freeze plug .
Any help or ideas ?
Wed, 05 Jul 2023 20:00:28 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

help with insturment lights

A few months ago wife had a new stereo receiver installed in her van and ever since, the battery will die if the vehicle is not driven in about 36 to 48 hours. Have taken it back to the shop several times, first they blamed the battery then the alternator, then the wheelchair ramp for my daughter. Been frustrated with this for a while. The other night I happened to notice that there are a few lights that will not turn off no matter how long it has been. Notably the headlight knob, the... help with insturment lights
A few months ago wife had a new stereo receiver installed in her van and ever since, the battery will die if the vehicle is not driven in about 36 to 48 hours. Have taken it back to the shop several times, first they blamed the battery then the alternator, then the wheelchair ramp for my daughter. Been frustrated with this for a while. The other night I happened to notice that there are a few lights that will not turn off no matter how long it has been. Notably the headlight knob, the...

help with insturment lights
Wed, 05 Jul 2023 19:33:59 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Have AC: Its just not blowing into the Cab atht much

Redid my 318 LA V8 recently and when I installed the new AC compressor, the refrigerant was working fine: making tons of condensation on the AC lines. The compressor and clutch were working just fine. But.........inside the cab, the temp of the air eventually got there but it didn't blow with much power at all. The blower and fan "sound" like always on our 88, but just not much coming into cab. Thanks
Redid my 318 LA V8 recently and when I installed the new AC compressor, the refrigerant was working fine: making tons of condensation on the AC lines. The compressor and clutch were working just fine. But.........inside the cab, the temp of the air eventually got there but it didn't blow with much power at all. The blower and fan "sound" like always on our 88, but just not much coming into cab.

Thanks
Wed, 05 Jul 2023 18:41:17 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Engine Block Coolant Plug Problems

I removed the engine block coolant plugs on my 1987 D150 318. The plug threads were pretty chewed up, and now I can't get them to thread back in! I'm plugless and stuck. I've heard they're 1/4" NPT pipe fittings. I bought new ones and they barely thread half way in. I think I need to tap the threads, but don't know if I can use an SAE tap. Can anyone help so I can get this truck running again? Thanks!
I removed the engine block coolant plugs on my 1987 D150 318. The plug threads were pretty chewed up, and now I can't get them to thread back in! I'm plugless and stuck.

I've heard they're 1/4" NPT pipe fittings. I bought new ones and they barely thread half way in.

I think I need to tap the threads, but don't know if I can use an SAE tap. Can anyone help so I can get this truck running again?

Thanks!
Wed, 05 Jul 2023 14:15:03 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579