Monday, January 2, 2023

2012 Dodge Grand Caravan (gen. 5?) - How to Reset HVAC?

Hi all, First timer, here. The passenger-side heat control is stuck on full, even when turned all the way to cold. Driver's side is okay. My wife is beginning to complain. I've read in several places that the HVAC system can be reset, but can't find instructions for the 2012 model or any other gen. 5 with a dual-zone heater. I should also mention that this is a Canadian version of the 2012 Dodge Grand Caravan (if that makes a difference). Does anyone know how to do this? If I need to... 2012 Dodge Grand Caravan (gen. 5?) - How to Reset HVAC?
Hi all,
First timer, here.

The passenger-side heat control is stuck on full, even when turned all the way to cold. Driver's side is okay. My wife is beginning to complain.

I've read in several places that the HVAC system can be reset, but can't find instructions for the 2012 model or any other gen. 5 with a dual-zone heater.

I should also mention that this is a Canadian version of the 2012 Dodge Grand Caravan (if that makes a difference).

Does anyone know how to do this?

If I need to...

2012 Dodge Grand Caravan (gen. 5?) - How to Reset HVAC?
Mon, 02 Jan 2023 20:34:19 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

Control arm bushings

So, I ordered new control arm bushings for my 1986 D150 2wd. The camber bolt holds are too small. Can I use smaller camber bolts or do I need to find a different bushing? Also, I got the first bushings from oreillys, one box correct, one smaller diameter, same part number. Pulled another box from shelf, too small. Went across street to auto zone same thing too small. What gives?
So, I ordered new control arm bushings for my 1986 D150 2wd. The camber bolt holds are too small. Can I use smaller camber bolts or do I need to find a different bushing?
Also, I got the first bushings from oreillys, one box correct, one smaller diameter, same part number. Pulled another box from shelf, too small. Went across street to auto zone same thing too small. What gives?
Mon, 02 Jan 2023 20:23:33 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

Radio Issues

My boyfriends 2013 dodge ram 1500 has been having issues with radio (see attached photo) have had it to a dealer for an update already to this still periodically comes up we then have no access to anything on the touch screen. Has anyone else had this issue and how did you resolve it? Thanks
My boyfriends 2013 dodge ram 1500 has been having issues with radio (see attached photo) have had it to a dealer for an update already to this still periodically comes up we then have no access to anything on the touch screen. Has anyone else had this issue and how did you resolve it? Thanks
Mon, 02 Jan 2023 20:02:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

Sunday, January 1, 2023

2014 5.7, 8 speed heat exchanger?

Hello, recently I replaced the water pump with a Mopar unit. I believe there to be a air lock in the trans heater. I didn't know about the bleeder on the water pump. As far as removing it so it would take the coolant. So I started the engine and waited for it to take some coolant. Threw a cooling performance code, went into limp mode but it eventually started taking coolant. Things went back to normal. Except the trans is real slow to come up to temp. So I believe when it was running... 2014 5.7, 8 speed heat exchanger?
Hello, recently I replaced the water pump with a Mopar unit.
I believe there to be a air lock in the trans heater.
I didn't know about the bleeder on the water pump. As far as removing it so it would take the coolant.
So I started the engine and waited for it to take some coolant.
Threw a cooling performance code, went into limp mode but it eventually started taking coolant. Things went back to normal.
Except the trans is real slow to come up to temp.
So I believe when it was running...

2014 5.7, 8 speed heat exchanger?
Mon, 02 Jan 2023 05:24:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

No low beam on passenger side

New bulbs. Fuses are fine, wires at the plug looked dark/burned so I replaced the plug. Ive got high beams, marker lights and turn signals. I dont know a whole lot about wrenching or electricity. Gave it my best shot and im stumped. Im really hoping its not the tipm 06 1500 4.7
New bulbs. Fuses are fine, wires at the plug looked dark/burned so I replaced the plug. Ive got high beams, marker lights and turn signals.

I dont know a whole lot about wrenching or electricity. Gave it my best shot and im stumped. Im really hoping its not the tipm

06 1500 4.7
Mon, 02 Jan 2023 01:49:48 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

hydrolocked

Friend Hydrolocked her 3.6 last night. pulled plugs and valve covers upper and lower intake. motor will only turn less than 90 degrees either direction and get a hard clunk from back of motor. Any thoughts on checking flexplate or starter or since the cams seem to be turning ok and valves from what i can tell are ok all 6 pistons are moving up and down with the crank bolt being wrenched back and forth the 90 degrees it will turn what makes sense as far as what broke?
Friend Hydrolocked her 3.6 last night. pulled plugs and valve covers upper and lower intake. motor will only turn less than 90 degrees either direction and get a hard clunk from back of motor. Any thoughts on checking flexplate or starter or since the cams seem to be turning ok and valves from what i can tell are ok all 6 pistons are moving up and down with the crank bolt being wrenched back and forth the 90 degrees it will turn what makes sense as far as what broke?
Mon, 02 Jan 2023 00:22:25 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

1992 b250 radio questions

Hello. She only had 87 thousand on her, just got her last Tuesday the 27th. No issues. Just a radio question. First. Would it be a single din or a double din to upgrade too. I just cannot figure out if I need a big ass screen or a normal old school tuner. The new terminology throws me sometimes.
Hello. She only had 87 thousand on her, just got her last Tuesday the 27th.
No issues. Just a radio question.
First. Would it be a single din or a double din to upgrade too.
I just cannot figure out if I need a big ass screen or a normal old school tuner. The new terminology throws me sometimes.
Sun, 01 Jan 2023 20:27:44 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

Rear end

First off. I don't know much about vehicles period. That being said . I'd like straight up answers with zero bs.. ok. I have a 00 ram Laramie 5.9l automatic 4x4. My rear end went out day after Thanksgiving. I need a new one. I'm pretty sure mine is a 355. Had a buddy suggest putting a ton rear end in to replace. I haul a lot during yard sale season because I do storage auctions an clean outs an going to flea markets to sell on the weekends. It is a daily driver. Can I put a 1ton rear end in... Rear end
First off. I don't know much about vehicles period. That being said . I'd like straight up answers with zero bs.. ok. I have a 00 ram Laramie 5.9l automatic 4x4. My rear end went out day after Thanksgiving. I need a new one. I'm pretty sure mine is a 355. Had a buddy suggest putting a ton rear end in to replace. I haul a lot during yard sale season because I do storage auctions an clean outs an going to flea markets to sell on the weekends. It is a daily driver. Can I put a 1ton rear end in...

Rear end
Sun, 01 Jan 2023 19:39:50 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

New member here.

Looking foward to learning and helping.
Looking foward to learning and helping.



Sun, 01 Jan 2023 11:32:36 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at

Filler neck hose

I realized I accidentally posted this in the wrong area so I started a new post in the correct area but I didn't delete the old post and I got in trouble. So I apologize for that. Ok on to my original question ... I have a 76 D-100 custom long bed with the 20gal plastic tank. I am replacing the filler neck hose going from the filler neck to the filler neck on the gas tank but can't find the hose anywhere. I searched around on here and found posts about the hose but the information in the... Filler neck hose
I realized I accidentally posted this in the wrong area so I started a new post in the correct area but I didn't delete the old post and I got in trouble. So I apologize for that.

Ok on to my original question ... I have a 76 D-100 custom long bed with the 20gal plastic tank. I am replacing the filler neck hose going from the filler neck to the filler neck on the gas tank but can't find the hose anywhere. I searched around on here and found posts about the hose but the information in the...

Filler neck hose
Sun, 01 Jan 2023 09:02:26 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579
Posted by at
Subscribe to: Posts (Atom)