Saturday, November 9, 2019

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 1499

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 1499

5. Retest for DTC P0C1A.

Circuit/System Testing

1. Inspect for DTCs P0A45, P0A46, P0A79, P0BFE, P0C04, P0C08, P0C0E, P0C18, P0C4F, P0C57, P0C58, P0C61, P0C62, P1AFE, P1B04,

or P1B10.

瀚慖f the specified DTCs are set, repair them first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle (See: Diagnostic Trouble Code

Descriptions/Diagnostic Trouble Code (DTC) List - Vehicle).

2. Repair the following conditions if observed:

Important: If a seized or binding drive axle is observed, internal transmission damage may have occurred.

* Seized or binding drive axle

* Seized or binding transfer case (4 wheel drive option)

* Seized or binding braking system

3. Attempt to drive the vehicle and retest for DTC P0C1A.

瀚慖f the DTC resets and the vehicle makes no attempt to crank the engine, program the PIM with the latest software version and recheck for

DTCs. If the DTC resets after programming or if the PIM already contains the latest software version, replace the PIM.

瀚慖f the engine initially starts but the vehicle later stalls, replace the drive motor generator assembly.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

Drive Motor with Generator Assembly Removal - 2nd Position (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and

Repair/Overhaul/2ML70 - Automatic Transmission/13. Drive Motor with Generator Assembly Removal - 2nd Position)

P0C2B

DTC P0C2B

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions)provides an overview of each diagnostic category.

DTC Descriptor

DTC P0C2B

- Auxiliary Transmission Fluid Pump Control Feedback Circuit

Diagnostic Fault Information

Typical Scan Tool Data