2011 Grand Caravan, can rear blend door problems affect dash a/c?

One of my rear blend door actuators is clicking. I've had the problem before and fixed it, and will fix it again shortly. However, I've also noticed my a/c is not blowing very cold. I'm going to check pressures and such, but before I get started, I was wondering if the rear actuator problem could be doing something the a/c that would cause it to blow warmer air. For example, if a blend door at the rear is stuck in a certain position, could it affect blend doors in the front?

One of my rear blend door actuators is clicking. I've had the problem before and fixed it, and will fix it again shortly. However, I've also noticed my a/c is not blowing very cold. I'm going to check pressures and such, but before I get started, I was wondering if the rear actuator problem could be doing something the a/c that would cause it to blow warmer air. For example, if a blend door at the rear is stuck in a certain position, could it affect blend doors in the front?

Wed, 31 May 2023 23:37:46 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2007 Dodge Grand Caravan SXT 3.8L is making very loud roaring noise from the front end

2007 Dodge Grand Caravan SXT 3.8L is making very loud roaring noise from the front end, likely from the front driver side. I have replaced the wheel hubs on the both sides but it didn't help much. Recently noticed the ABS light came on and found on the driver side, the tooth on the axle is off the center of the ABS sensor. The axle seems stucking too close to the wheel hub assembly (see the photos for details). I have no idea how this could happen. Everything seems tight and firm. But how... 2007 Dodge Grand Caravan SXT 3.8L is making very loud roaring noise from the front end

2007 Dodge Grand Caravan SXT 3.8L is making very loud roaring noise from the front end, likely from the front driver side. I have replaced the wheel hubs on the both sides but it didn't help much. Recently noticed the ABS light came on and found on the driver side, the tooth on the axle is off the center of the ABS sensor. The axle seems stucking too close to the wheel hub assembly (see the photos for details). I have no idea how this could happen. Everything seems tight and firm. But how...

2007 Dodge Grand Caravan SXT 3.8L is making very loud roaring noise from the front end

Wed, 31 May 2023 23:00:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Rough County 2.5" Leveling Kit

Just recently bought an 07 1500 4x4. I want to level it out but really not sure where to begin. I see so many options out there. After researching I found the Rough Country 2.5" leveling kit. Here is the link: [URL... Rough County 2.5" Leveling Kit

Just recently bought an 07 1500 4x4. I want to level it out but really not sure where to begin. I see so many options out there. After researching I found the Rough Country 2.5" leveling kit. Here is the link:

[URL...

Rough County 2.5" Leveling Kit

Wed, 31 May 2023 21:17:41 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

MANUAL TRANSMISSION CHALLENGER HELLCATS AVAILABLE FOR ORDERING!!!

GREAT NEWS!!! FINALLY THE TIME HAS COME!! THE MANUAL TRANSMISSION CHALLENGER HELLCAT ENGINE JUST OPENED UP FOR ORDERING IN BOTH NARROW BODY AND WIDEBODY!!!! AND BEST OF ALL, WE STILL HAVE AVAILABLE ALLOCATION!! We are doing the first 5 orders at MSRP. Please go to Dodge.com, build out your ideal Hellcat and email the PDF to koonsgroupbuy@koons.com or koonsgroupbuy@gmail.com

GREAT NEWS!!! FINALLY THE TIME HAS COME!! THE MANUAL TRANSMISSION CHALLENGER HELLCAT ENGINE JUST OPENED UP FOR ORDERING IN BOTH NARROW BODY AND WIDEBODY!!!! AND BEST OF ALL, WE STILL HAVE AVAILABLE ALLOCATION!!

We are doing the first 5 orders at MSRP.

Please go to Dodge.com, build out your ideal Hellcat and email the PDF to koonsgroupbuy@koons.com or koonsgroupbuy@gmail.com

Wed, 31 May 2023 20:35:21 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2010 Ram 1500 v8 Hemi 5.7 liter engine

We are trying to find the towing capacity for this vehicle. Anyone have suggestions on figuring that out? I called the Dodge dealership and didn't get a solid answer. I have googled it to no end with so many different answers. We do not have the vehicle manual.

We are trying to find the towing capacity for this vehicle. Anyone have suggestions on figuring that out? I called the Dodge dealership and didn't get a solid answer. I have googled it to no end with so many different answers. We do not have the vehicle manual.

Wed, 31 May 2023 20:36:14 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Check engine light

The other day my check engine light came on. Yesterday I took it in for brakes and for them to check why the light was on... but when I got in to take it the light wasn't on, nor did it come back on since. 2004 5.7 hemi with 87,000 miles. Any ideas?

The other day my check engine light came on. Yesterday I took it in for brakes and for them to check why the light was on... but when I got in to take it the light wasn't on, nor did it come back on since.
2004 5.7 hemi with 87,000 miles.
Any ideas?

Wed, 31 May 2023 16:59:27 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Aftermarket Head Lights?

Normally I think 99% of aftermarket headlights look cheap and/or really do not produce a decent amount of useable light. However I would like to make my '05's front end look a little more modern. I like the look of these, but based on the price of them they are going to look cheap (because they are) and probably not make much light. Has anyone used these or have a suggestion to better ones that look similar? Thanks... Aftermarket Head Lights?

Normally I think 99% of aftermarket headlights look cheap and/or really do not produce a decent amount of useable light. However I would like to make my '05's front end look a little more modern. I like the look of these, but based on the price of them they are going to look cheap (because they are) and probably not make much light. Has anyone used these or have a suggestion to better ones that look similar? Thanks...

Aftermarket Head Lights?

Wed, 31 May 2023 14:38:45 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

315 poly water pump

i am in desperate need for a 315 poly water pump! anyone have on that is located in eastern mn or western wi???

i am in desperate need for a 315 poly water pump!
anyone have on that is located in eastern mn or western wi???

Wed, 31 May 2023 12:21:08 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Front axle issues

So I took my 2017 Ram 1500 into my dealership for a bad left front wheel bearing which they confirmed, but they are telling me the right axle has backed out of the differential and allowed moisture to get inside causing rust. I have a extended warranty that covers drivetrain, but they are declining the repair to replace the diff and axle due to the cause of rust. Rust is the result, not the cause. The dealer is saying it's a known issue for the axle to back out and allow moisture in and... Front axle issues

So I took my 2017 Ram 1500 into my dealership for a bad left front wheel bearing which they confirmed, but they are telling me the right axle has backed out of the differential and allowed moisture to get inside causing rust. I have a extended warranty that covers drivetrain, but they are declining the repair to replace the diff and axle due to the cause of rust. Rust is the result, not the cause. The dealer is saying it's a known issue for the axle to back out and allow moisture in and...

Front axle issues

Wed, 31 May 2023 11:40:03 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Gas tank size

Wondering if vany one knows gas tank size for 79 dodge d150?

Wondering if vany one knows gas tank size for 79 dodge d150?

Tue, 30 May 2023 23:30:54 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

91 dodge B250 tranny seized

Well I come across a first for me ( my luck running true) & haven't come across anybody else over this issue. My engine locked up. Had no idea what happened no noise from engine---good oil pressure, just quit. I had suspicions that it was tranny so proceeded to remove tranny from engine to establish what the problem was/is. Tranny would not come out. Unable to rotate motor being locked up to remove converter bolts . Had to pry tranny away from motor bending flexplate to take converter bolts... 91 dodge B250 tranny seized

Well I come across a first for me ( my luck running true) & haven't come across anybody else over this issue. My engine locked up. Had no idea what happened no noise from engine---good oil pressure, just quit. I had suspicions that it was tranny so proceeded to remove tranny from engine to establish what the problem was/is. Tranny would not come out. Unable to rotate motor being locked up to remove converter bolts . Had to pry tranny away from motor bending flexplate to take converter bolts...

91 dodge B250 tranny seized

Tue, 30 May 2023 23:08:23 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Intermittent Misfire

I have a 2007 Dodge Dakota that has had an intermittent misfire only in overdrive for six years. At first it threw the random misfire codes, but now the check engine light doesn't come on and the reader shows no codes. It has had new coils, plugs and O2 sensors but that didn't help. It has the 3.7 engine. Any suggestions? Thanks

I have a 2007 Dodge Dakota that has had an intermittent misfire only in overdrive for six years. At first it threw the random misfire codes, but now the check engine light doesn't come on and the reader shows no codes. It has had new coils, plugs and O2 sensors but that didn't help. It has the 3.7 engine. Any suggestions? Thanks

Tue, 09 May 2023 18:22:19 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2001 dodge Ram 1500 differential help

I have a question I have a 2001 dodge Ram 1500 4wd with the 3.92 limited slip differential and I am replacing it with a 3.92 limited slip out of a 99 dodge Ram 1500. Ive already replaced backing plates and now my yoke that bolts to driveshaft is different. When my 01 flange type doesn't fit correctly what do I do? Replace the u joint and use my driveshaft or what. The 99 has the ujoint retainer plates while my 01 doesn't.

I have a question I have a 2001 dodge Ram 1500 4wd with the 3.92 limited slip differential and I am replacing it with a 3.92 limited slip out of a 99 dodge Ram 1500. Ive already replaced backing plates and now my yoke that bolts to driveshaft is different. When my 01 flange type doesn't fit correctly what do I do? Replace the u joint and use my driveshaft or what. The 99 has the ujoint retainer plates
while my 01 doesn't.

Tue, 09 May 2023 09:17:16 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2000 Dodge ram Van b1500 mkiii se need help identifying this part?

I can't find this part in the service repair manual anywhere. it is leaking, I looked up the part number that is on the part itself and it it comes up on ebay as a "vacuum actuator".I still can't find the part in the manual nor can I locate the gasket. Can anyone help me identify this part and what do I tell the folks at the auto parts store that I want to order? Thank you!

I can't find this part in the service repair manual anywhere. it is leaking, I looked up the part number that is on the part itself and it it comes up on ebay as a "vacuum actuator".I still can't find the part in the manual nor can I locate the gasket. Can anyone help me identify this part and what do I tell the folks at the auto parts store that I want to order?

Thank you!

Mon, 08 May 2023 22:46:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2000 dakota 4wd 3.9 ltr

Hello everyone, thank you for letting me be apart of this community. Great discussions, I have learned a lot from you guys. I'm in the process of swapping my 3.9 out for a 360LA. The motor has been rebuilt and has nice Edulbrock dress up kit on it. Nothing real fancy, just a clean, tight motor. The 3.9 has over 200k on it. It's tired, low compression so I decided to go for it and do the swap. I know the oil pan needs a mod and different pick up tube for oil. I can't find mounts for motor... 2000 dakota 4wd 3.9 ltr

Hello everyone, thank you for letting me be apart of this community. Great discussions, I have learned a lot from you guys. I'm in the process of swapping my 3.9 out for a 360LA. The motor has been rebuilt and has nice Edulbrock dress up kit on it. Nothing real fancy, just a clean, tight motor. The 3.9 has over 200k on it. It's tired, low compression so I decided to go for it and do the swap. I know the oil pan needs a mod and different pick up tube for oil. I can't find mounts for motor...

2000 dakota 4wd 3.9 ltr

Mon, 08 May 2023 05:40:14 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

01 Caravan dies after 20 minutes of driving

Any ideas? My mom was given this van recently, it has a new battery but before that it had been parked in the bushes for a while. She did just get an oil change about a month and a half ago. It's had that sticky lifted sound that we thought might go away after the oil change. It didn't... A day before it died, the lifter sound started getting louder ...I checked the oil level and it was low which I thought was weird and too soon. It was only a little low. I added a quart. The sound turned... 01 Caravan dies after 20 minutes of driving

Any ideas? My mom was given this van recently, it has a new battery but before that it had been parked in the bushes for a while. She did just get an oil change about a month and a half ago. It's had that sticky lifted sound that we thought might go away after the oil change. It didn't... A day before it died, the lifter sound started getting louder ...I checked the oil level and it was low which I thought was weird and too soon. It was only a little low. I added a quart. The sound turned...

01 Caravan dies after 20 minutes of driving

Mon, 08 May 2023 02:40:30 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Lift kit for 91 dodge d250 with the 318

Looking to lift my 91 d250 2wd was wondering what all I was needing wanting about 4 inches all the way around. As it sits it nosedives a bit

Looking to lift my 91 d250 2wd was wondering what all I was needing wanting about 4 inches all the way around. As it sits it nosedives a bit

Mon, 08 May 2023 01:32:10 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Bed doesn’t line up with bottom of cab

Hi I am looking to buy a crew cab first gen, I found one for sale but for some reason the bed doesn't line up with the bottom of the cab at all. Owner says it isn't the right bed for the year, does anyone know what year bed I might be looking for?

Hi I am looking to buy a crew cab first gen, I found one for sale but for some reason the bed doesn't line up with the bottom of the cab at all. Owner says it isn't the right bed for the year, does anyone know what year bed I might be looking for?

Mon, 08 May 2023 01:07:45 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Engine swap

I need a wiring harness that will work for a engine swap from a v6 magnum to a 5.2 318 i already have a computer for the 318 but need a different wiring harness cause the 318 is from a van so the wiring harness is to short to reach where the computer is supposed to be mounted

I need a wiring harness that will work for a engine swap from a v6 magnum to a 5.2 318 i already have a computer for the 318 but need a different wiring harness cause the 318 is from a van so the wiring harness is to short to reach where the computer is supposed to be mounted

Sun, 07 May 2023 22:10:29 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Loud knocking and black smoke

06 Dodge 2500 with the 5.9 cummins I'll just put all new injectors tubes and rocker Box gas did Let it run for all of 10 minutes Then it started to make a loud knocking noise and lots of black spoke Any idea what this could be please help I am disabled and cannot afford to keep putting A ton of money into this truck Please help

06 Dodge 2500 with the 5.9 cummins I'll just put all new injectors tubes and rocker Box gas did Let it run for all of 10 minutes Then it started to make a loud knocking noise and lots of black spoke Any idea what this could be please help I am disabled and cannot afford to keep putting A ton of money into this truck Please help

Sun, 07 May 2023 09:10:04 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2004 dodge ram 1500 engine swap

I just got my dad's 2004 dodge ram it has a 4.7L V8 and it has 200.000 miles and it has been are dream to put something faster in it he wants to put the SRT 10 in I don't want it but something faster than the 4.7L V8. I also don't know what will fit and what won't

I just got my dad's 2004 dodge ram it has a 4.7L V8 and it has 200.000 miles and it has been are dream to put something faster in it he wants to put the SRT 10 in I don't want it but something faster than the 4.7L V8. I also don't know what will fit and what won't

Sun, 07 May 2023 02:34:53 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

1989 Dodge Ram pickup - help with replacing front windshield casing

Hi all, writing from Southwestern PA... Can anyone direct me to a shop or auto body person in my area who can replace a rusted out front windshield casing? Thanks for any assistance. -

Hi all,
writing from Southwestern PA... Can anyone direct me to a shop or auto body person in my area who can replace a rusted out front windshield casing?
Thanks for any assistance. -

Sat, 06 May 2023 21:40:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Rear diff is locking up on me

So when I turn and accelerate through or out of the turn I hear a loud bang and the whole truck jolts. Sometimes it feels like it's the front driver side. And sometimes it feels like it's coming from the back. I dunno what I'm looking for. My buddy told me it might be the rear diff. I check for play and tired on both sides in the back do have some play but so little that I can only hear it. Can't actually tells its moving at all. Any advice, help, tips or need any more info from me please... Rear diff is locking up on me

So when I turn and accelerate through or out of the turn I hear a loud bang and the whole truck jolts. Sometimes it feels like it's the front driver side. And sometimes it feels like it's coming from the back. I dunno what I'm looking for. My buddy told me it might be the rear diff. I check for play and tired on both sides in the back do have some play but so little that I can only hear it. Can't actually tells its moving at all. Any advice, help, tips or need any more info from me please...

Rear diff is locking up on me

Sat, 06 May 2023 16:29:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

02 dakota rebuilt v8

Front wheel sittin at 7 and 1oclock... know upper ball joint bad. Will chk inner n outter tierods. Anybody got any other knowledge tegarding this?? Also main bolt for rack keeps coming loose Thnx

Front wheel sittin at 7 and 1oclock... know upper ball joint bad. Will chk inner n outter tierods. Anybody got any other knowledge tegarding this?? Also main bolt for rack keeps coming loose
Thnx

Sat, 06 May 2023 02:32:28 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

2016 sliding door replacement

First time 2016 GC owner here. Few weeks ago I hit a steel pole and damaged my passenger side sliding door. I was able to find an undamaged manual sliding door. Now, I was probably really excited when I found the exact same color door at the junkyard and didn't realize it didn't have power window control. So today, looking at the door again, I learned a valuable lesson, not all Grand Caravans come with the power windows in the back. Anywas the door cost me $80 from pick and pull... 2016 sliding door replacement

First time 2016 GC owner here.

Few weeks ago I hit a steel pole and damaged my passenger side sliding door.

I was able to find an undamaged manual sliding door. Now, I was probably really excited when I found the exact same color door at the junkyard and didn't realize it didn't have power window control. So today, looking at the door again, I learned a valuable lesson, not all Grand Caravans come with the power windows in the back.

Anywas the door cost me $80 from pick and pull...

2016 sliding door replacement

Fri, 05 May 2023 03:43:01 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

1967 Dodge d100

Could anyone tell me what this truck is worth or what you would offer me. It runs and drives needs some brake line work . 6cly 3speed on the tree.

Could anyone tell me what this truck is worth or what you would offer me. It runs and drives needs some brake line work . 6cly 3speed on the tree.

Fri, 05 May 2023 02:11:27 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Sniper intake on a 3rs gen 5.7

Long story short git a rebuilt 5.7 and it was a must to change the intake to new,nit able to find a brand new stock one I went with a sniper intake,has anyone done this before?I have a feeling the stock computer will need flashed and reprogrammed,if anyone has some info I would greatly appreciate it,thanks

Long story short git a rebuilt 5.7 and it was a must to change the intake to new,nit able to find a brand new stock one I went with a sniper intake,has anyone done this before?I have a feeling the stock computer will need flashed and reprogrammed,if anyone has some info I would greatly appreciate it,thanks

Fri, 05 May 2023 01:39:37 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Truck

Truck Sent from my iPhone using Tapatalk

Truck


Sent from my iPhone using Tapatalk

Thu, 04 May 2023 20:48:24 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

1977 B-200 maxivan hitch reciever

Greetings I have a 1977 dodge b200 maxivan w/a 1978 xplorer 212 conversion. I cant find a hitch reciever for it. Does anyone have one, know a part # or a useable solution for this? Thank you

Greetings I have a 1977 dodge b200 maxivan w/a 1978 xplorer 212 conversion. I cant find a hitch reciever for it. Does anyone have one, know a part # or a useable solution for this? Thank you

Thu, 04 May 2023 18:32:47 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Time is RUNNING OUT 🏃‍♂️💨 Get Yours TODAY!

Time is running out! Get a FREE dual-output backlit wiring harness (DD4092) valued at $40 with every pair of universal SSC1, SSC2, or SS3 backlit purchased! Adding pods to your cart is all it takes - no coupon code is necessary. This offer ends May 5th, or while supplies last! Take advantage of this deal TODAY! ...​ Time is RUNNING OUT 🏃‍♂️💨 Get Yours TODAY!

Time is running out!

Get a FREE dual-output backlit wiring harness (DD4092) valued at $40 with every pair of universal SSC1, SSC2, or SS3 backlit purchased!

Adding pods to your cart is all it takes - no coupon code is necessary.

This offer ends May 5th, or while supplies last! Take advantage of this deal TODAY!

...​

Time is RUNNING OUT 🏃‍♂️💨 Get Yours TODAY!

Thu, 04 May 2023 16:57:10 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Factory service tech

Good morning. Are there any members here on this site that work in a service department at any dealership? I am looking for some info that's not in the factory service manual. The info I am looking for is what diagnostic troubleshooting steps are there to determine code P0601 is definitely the ecu and not something else. I have the pinout for the (3) 32 pin connectors and was able to verify rock solid ground (no resistance) on pin 31 and 32 as well as its receiving proper input voltage. I... Factory service tech

Good morning.

Are there any members here on this site that work in a service department at any dealership? I am looking for some info that's not in the factory service manual. The info I am looking for is what diagnostic troubleshooting steps are there to determine code P0601 is definitely the ecu and not something else. I have the pinout for the (3) 32 pin connectors and was able to verify rock solid ground (no resistance) on pin 31 and 32 as well as its receiving proper input voltage. I...

Factory service tech

Thu, 04 May 2023 13:47:36 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Manual valve body vs regular

I have a 89 ram with a built 340, 440hp, it had a 904 tranny with reverse valve body, I had the tranny rebuilt with a regular valve body and now its has lost a lot of power, was it because i had the regular valve body installed? Not the same truck since i had this done, i used to light up the tires through drive, now only 1 gear.

I have a 89 ram with a built 340, 440hp, it had a 904 tranny with reverse valve body, I had the tranny rebuilt with a regular valve body and now its has lost a lot of power, was it because i had the regular valve body installed? Not the same truck since i had this done, i used to light up the tires through drive, now only 1 gear.

Thu, 04 May 2023 09:12:21 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Android Auto and Uconnect

Hello everyone. What years of Dodge Grand caravan GT and RT have Uconnect with Android Auto?

Hello everyone. What years of Dodge Grand caravan GT and RT have Uconnect with Android Auto?

Thu, 04 May 2023 00:26:15 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Heater loosing heat normal¡¿

Sorry if wrong thread. Have a 2017 1500 outdoorsman. Last fall the heater core went and was replaced. The problem is that now it will to hold temp. It will blow hot for a while then tapper off untill it feels like the AC is on. Before it was constant set and forget now you have to be constantly turing it up to keep warm air. We have had it to 3 difrent dealer shops. First changed the rad thermostat and when we went back said nothing is wrong. The other 2 have only said everything is... Heater loosing heat normal¡¿

Sorry if wrong thread.

Have a 2017 1500 outdoorsman.

Last fall the heater core went and was replaced. The problem is that now it will to hold temp. It will blow hot for a while then tapper off untill it feels like the AC is on.

Before it was constant set and forget now you have to be constantly turing it up to keep warm air.

We have had it to 3 difrent dealer shops. First changed the rad thermostat and when we went back said nothing is wrong. The other 2 have only said everything is...

Heater loosing heat normal¡¿

Wed, 03 May 2023 14:44:03 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

54 Dodge pickup project

Hello, I recently purchased a 54 Dodge 5 window pu project. I have since decided that this is probably something that will be too much for me to take on. I'm trying to find out what the value would be for this unit. It's a 54 5 window with what appears to be most all of the parts sitting on a 2002 Dodge Durango chassis. There is no engine or transmission, but parts of some. The windshield and rear glass are missing, but at least one door has glass, and the corner glass is good, just not... 54 Dodge pickup project

Hello,
I recently purchased a 54 Dodge 5 window pu project. I have since decided that this is probably something that will be too much for me to take on.
I'm trying to find out what the value would be for this unit. It's a 54 5 window with what appears to be most all of the parts sitting on a 2002 Dodge Durango chassis. There is no engine or transmission, but parts of some. The windshield and rear glass are missing, but at least one door has glass, and the corner glass is good, just not...

54 Dodge pickup project

Wed, 03 May 2023 04:37:11 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

89 w100 driver taillight not working

Hello all, I'm new here and sorry if this is a repetitive post, but I'vebeen fixing up my 89 w100 and I can not get the driver side tail light to work. I can't remember if it was working before I started fixing it up or not. I upgraded all the lights to LED's I changed the sockets themselves with new bulbs. I have checked all the fuses and replaced the turn signal switch. Does anyone have any other suggestions on what to check next? Also, the brake lights, turn signals, hazards, and reverse... 89 w100 driver taillight not working

Hello all,

I'm new here and sorry if this is a repetitive post, but I'vebeen fixing up my 89 w100 and I can not get the driver side tail light to work. I can't remember if it was working before I started fixing it up or not. I upgraded all the lights to LED's I changed the sockets themselves with new bulbs. I have checked all the fuses and replaced the turn signal switch. Does anyone have any other suggestions on what to check next? Also, the brake lights, turn signals, hazards, and reverse...

89 w100 driver taillight not working

Wed, 03 May 2023 01:21:56 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Need help

I got a 93 Dodge Dakota 3.9 it will crack no start I gave it a basic tune up I changed the coil and the crank sensor cam sensor and I'm in the process of changing the ignition switch but havein problems doing that I can't get it to come out

I got a 93 Dodge Dakota 3.9 it will crack no start I gave it a basic tune up I changed the coil and the crank sensor cam sensor and I'm in the process of changing the ignition switch but havein problems doing that I can't get it to come out

Tue, 02 May 2023 23:48:07 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Electronic dashboard

I have a 2015 Dodge Caravan and was wondering if it's possible to upgrade the electronics to show instant gas mileage as well as average mpg?

I have a 2015 Dodge Caravan and was wondering if it's possible to upgrade the electronics to show instant gas mileage as well as average mpg?

Tue, 02 May 2023 14:00:56 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Anyone reseal their rear window lately?

What'd it cost ya? I'm going to reseal the 3rd brake light 1st but I'm pretty sure it's the whole glass. I've got the electric slider, just want to know what to expect. When it rains buckets anything under my seats gets damp.

What'd it cost ya? I'm going to reseal the 3rd brake light 1st but I'm pretty sure it's the whole glass. I've got the electric slider, just want to know what to expect. When it rains buckets anything under my seats gets damp.

Tue, 02 May 2023 00:42:08 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Need help

I have a 2007 Durango with a 12 bolt, 9.25 rear axle that's going bad, I have access to a 2007 10 bolt, 8.25 axle, can I swap it out with no issues, or what else needs to be done

I have a 2007 Durango with a 12 bolt, 9.25 rear axle that's going bad, I have access to a 2007 10 bolt, 8.25 axle, can I swap it out with no issues, or what else needs to be done

Tue, 02 May 2023 00:10:02 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

How to remove dash.

Is there a in depth video or instructions on removing the dash. I have to remove it to replace the air distribution box. At the junkyard I took it apart in a weird way and not sure if there's a easier way.

Is there a in depth video or instructions on removing the dash. I have to remove it to replace the air distribution box. At the junkyard I took it apart in a weird way and not sure if there's a easier way.

Mon, 01 May 2023 23:43:24 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579

Fuel leak above pump module

I have a 2001 1500 w/ 5.2 liter gas engine. It seems that there is a leaking rubber cap on a nipple projecting from the fuel pump module. Based on what I see in the Haynes manual I suspect this is where an auxiliary fuel tank's line would connect if the truck had one. Any suggestions on a replacement part number or a hack to replace that little rubber cap? I bought this truck used after it had been used by a city's meter reading crew. It's beat but has made a surprisingly useful and... Fuel leak above pump module

I have a 2001 1500 w/ 5.2 liter gas engine. It seems that there is a leaking rubber cap on a nipple projecting from the fuel pump module. Based on what I see in the Haynes manual I suspect this is where an auxiliary fuel tank's line would connect if the truck had one. Any suggestions on a replacement part number or a hack to replace that little rubber cap? I bought this truck used after it had been used by a city's meter reading crew. It's beat but has made a surprisingly useful and...

Fuel leak above pump module

Mon, 01 May 2023 21:36:23 +0000
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84878595/stop/?check=68840f1e66a69a3d5d399fb729aaa579